IC-DP

www.DataSheet.co.kr iC-DP HIGHSIDE SWITCH Rev C3, Page 1/8 FEATURES o 36 V highside switch/level shifter o p-channel output driver without charge pump for short activation time o Decoupling of input and output reference voltages (SOT23-6L) permits control by 5V logic o 200 mA of output current o Short-circuit protected o Output with an active freewheeling circuit o On-chip overtemperature protection with hysteresis o 4 to 36 V input voltage range o Input with hysteresis o 3-pin configuration possible o Wide temperature range of -40 to 120 °C APPLICATIONS o Highside switch for industrial applications, such as relays, inductive proximity sensors and light barriers PACKAGES SOT23-6L BLOCK DIAGRAM 3-pin configuration PI iC-DP INPUT INTERFACE HIGH-SIDE SWITCH VP & Tj < 120°C temperature monitor 200 mA 3.5 V NI DP Copyright © 2011 iC-Haus http://www.ichaus.com Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr iC-DP HIGHSIDE SWITCH Rev C3, Page 2/8 DESCRIPTION iC-DP is a monolithic highside switch for ohmic, inductive and capacitive loads. Designed for a wide input voltage range of 4 to 36 V, it is capable of supplying a minimum output current of 200 mA. The output acts as a current source with a low saturation voltage; protection against shortcircuiting is provided by the device shutting down with excessive temperature. The chip is activated when the input voltage threshold V(PI)-V(NI) of typically 3.5 V is exceeded. When used as a 4-pin element, the i...