In-System Programmable Power Supply
www.DataSheet.co.kr
ispPAC-POWR607
In-System Programmable Power Supply Supervisor, Reset Generator and Watchdog Timer
F...
Description
www.DataSheet.co.kr
ispPAC-POWR607
In-System Programmable Power Supply Supervisor, Reset Generator and Watchdog Timer
February 2009 Data Sheet DS1011
®
Features
■ Power-Down Mode ICC < 10µA ■ Programmable Threshold Monitors
Simultaneously monitors up to six power supplies Programmable analog trip points (1% step size; 192 steps) Programmable glitch filter Power-off detection (75mV)
Application Block Diagram
Input Power Supply On/Off DC-DC #1 Manual Reset In DC-DC #2 DC-DC #n
■ Embedded Programmable Timers
Four independent timers 32µs to 2 second intervals for timing sequences
MOSFET Drivers (2)
Power Supply Bus
Voltage Supervisor Reset Generator
■ Embedded PLD for Logical Control
Rugged 16-macrocell CPLD architecture 81 product terms / 28 inputs Implements state machines and combinatorial functions
Interrupt – Power Fail CPU_Reset_in WDT Trigger Interrupt – WDT
Watchdog Timer
■ Digital I/O
Two dedicated digital inputs Five programmable digital I/O pins
Power Down
ispPAC-POWR607
Power Up/Down Control
CPU / uProcessor
■ Two High-Voltage FET Drivers
Power supply ramp up/down control Independently configurable for FET control or digital output
■ Wide Supply Range (2.64V to 3.96V)
In-system programmable through JTAG Industrial temperature range: -40°C to +85°C 32-pin QFNS (Quad Flat-pack, No lead, Sawsingulated) package, lead-free option1
Description
Lattice’s Power Manager II ispPAC-POWR607 is a general-purpose power-supply monitor,...
Similar Datasheet