USB-OTG 3-Line Protection
www.DataSheet.co.kr
ESD7383 USB-OTG 3-Line Protection
Product Description
The ESD7383 is a 4−bump very low capacitance...
Description
www.DataSheet.co.kr
ESD7383 USB-OTG 3-Line Protection
Product Description
The ESD7383 is a 4−bump very low capacitance ESD protection device in 0.4 mm CSP form factor. It is fully compliant with IEC 61000−4−2. The ESD7383 is RoHS II compliant.
Features
http://onsemi.com ELECTRICAL SCHEMATIC
These Devices are Pb−Free and are RoHS Compliant
Applications
♦
ESD protection for USB (including USB OTG)
USB compliance High Speed USB port Up to 480 Mb/s according to USB 2.0 high speed specification
CH1 (A1)
CH2 (B1)
CH3 (B2)
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating Peak Pulse Power Dissipation, 8 x 20 ms Maximum Peak Pulse Current, 8 x 20 ms Operating Junction Temperature Range Storage Temperature Range IEC 61000−4−2 Contact (ESD) Symbol Ppk IPP TJ Tstg ESD Value 50 2.5 − 40 to +85 − 55 to +150 ±8000 Unit W A °C °C V
GND (A2)
MARKING DIAGRAM
WLCSP4 CASE 567CB 7M
7 = Specific Device Code M = Date Code
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. B
PINOUT
B1 B2
A
A1
A2
1 2 BOTTOM VIEW
PIN DESCRIPTIONS
Pin A1 A2 B1 B2 Description ESD Channel 1 Device Ground ESD Channel 2 ESD Channel 3
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet...
Similar Datasheet