Preamplifier Circuit
www.DataSheet.co.kr
VSOP584..
www.vishay.com
Vishay Semiconductors
Preamplifier Circuit for IR Remote Control
FEATURE...
Description
www.DataSheet.co.kr
VSOP584..
www.vishay.com
Vishay Semiconductors
Preamplifier Circuit for IR Remote Control
FEATURES
Narrow bandpassfilter for all common carrier frequencies High immunity against DC light Intelligent AGC to suppress disturbance from fluorescent lamps and CRTs Low power consumption Wide supply voltage range High immunity against ripple on the supply voltage Output active low
22529
IC manufactured in CMOS technology Small QFN package with 2 mm width Compliant to RoHS Directive 2002/95/EC
Note ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
MECHANICAL DATA
Pinning: 1, 4, 5= N.C., 2 = VS, 3 = OUT, 6, 8 = GND, 7 = IN
DESCRIPTION
The VSOP584.. is designed for use in an IR receiver application together with a photo pin diode. It is a sophisticated receiver concept that is very sensitive to data signals and compatible with the most common data formats for IR remote control. On the other hand it is immune to DC current caused by DC light sources such as tungsten bulbs. The disturbance signal of fluorescent lamps is suppressed; there are no unwanted pulses at the output.
PARTS TABLE
CARRIER FREQUENCY 36 kHz 38 kHz Note Circuits for other carrier frequencies are available on request. PART NUMBER VSOP58436 VSOP58438
BLOCK DIAGRAM (simplified)
APPLICATION CIRCUIT
100 Ω
+ VS
VS = 2.7 V to 5.5 V
Bias Input, from photodiode
Controlled gain amplifier Bandpassfilter Automatic gain control
Automatic thresho...
Similar Datasheet