EN25T80
www.DataSheet.co.kr
www.DataSheet4U.com
EN25T80
EN25T80
8 Mbit Uniform Sector, Serial Flash Memory with Dual Data Mod...
Description
www.DataSheet.co.kr
www.DataSheet4U.com
EN25T80
EN25T80
8 Mbit Uniform Sector, Serial Flash Memory with Dual Data Mode
FEATURES
Single power supply operation - Full voltage range: 2.7-3.6 volt 8 Mbit Serial Flash - 8 M-bit/1024 K-byte/4096 pages - 256 bytes per programmable page High performance - 100MHz clock rate - dual data mode Low power consumption - 5 mA typical active current - 1 μA typical power down current Uniform Sector Architecture: 256 sectors of 4-Kbyte 16 blocks of 64-Kbyte Any sector or block can be erased individually - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin High performance program/erase speed Page program time: 1.5ms typical Sector erase time: 150ms typical Block erase time 800ms typical Chip erase time: 10 Seconds typical
Lockable 256 byte OTP security sector Minimum 100K endurance cycle Package Options 8 pins SOP 200mil body width 8 pins PDIP 8 contact VDFN All Pb-free packages are RoHS compliant
Commercial and industrial temperature Range
Software and Hardware Write Protection:
GENERAL DESCRIPTION
The EN25T80 is a 8M-bit (1024K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.
The EN25T80 is designed to allow either single Sector at a time or full chip erase operation. The EN25T80 can be configured to protect part of th...
Similar Datasheet