2-megabit (256K x 8) 3-volt Only Flash Memory
www.DataSheet.co.kr
Features
• • • • •
Single Voltage, Range 3V to 3.6V Supply 3-volt Only Read and Write Operation Sof...
Description
www.DataSheet.co.kr
Features
Single Voltage, Range 3V to 3.6V Supply 3-volt Only Read and Write Operation Software Protected Programming Fast Read Access Time – 100 ns Low Power Dissipation – 15 mA Active Current – 50 µA CMOS Standby Current Sector Program Operation – Single Cycle Reprogram (Erase and Program) – 1024 Sectors (256 Bytes/Sector) – Internal Address and Data Latches for 256 Bytes Two 8K Bytes Boot Blocks with Lockout Fast Sector Program Cycle Time – 20 ms Internal Program Control and Timer DATA Polling for End of Program Detection Typical Endurance > 10,000 Cycles CMOS and TTL Compatible Inputs and Outputs Green (Pb/Halide-free) Packaging Option
2-megabit (256K x 8) 3-volt Only Flash Memory AT29LV020
1. Description
The AT29LV020 is a 3-volt-only in-system Flash programmable and erasable read only memory (PEROM). Its 2 megabits of memory is organized as 262,144 bytes by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 100 ns with power dissipation of just 54 mW over the industrial temperature range. When the device is deselected, the CMOS standby current is less than 50 µA. The device endurance is such that any sector can typically be written to in excess of 10,000 times. To allow for simple in-system reprogrammability, the AT29LV020 does not require high input voltages for programming. Five-volt-only commands determine the operation of the device. Reading data out of the devic...
Similar Datasheet