Document
www.DataSheet4U.net
SAW Bandpass Filter F8152
Features
z z z z z RF bandpass filter High attenuation Usable bandwidth 19MHz No matching 50Ω single-ended operation Ceramic Surface Mounted Device (SMD) Package
3.80±0.15
1.00±0.15 0.44
1.90±0.15
1
6
6 0.44
1
2
ITF 8152
3.80±0.15
5
5
2
1.40±0.15
3
4
4
3 1.27±0.05
Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating
Pin Configuration 2 5 1, 3, 4, 6 Input Output Case ground
Maximum Ratings
Parameter Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit °C °C dBm Minimum -10 -40 Typical 25 Maximum 60 85 -
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
0.64±0.05
Package Dimensions
F8152 2004-09-30 DR3002-PS02 1/7
www.DataSheet4U.net
SAW Bandpass Filter F8152
Specifications
Fc = 815.5MHz Terminating source impedance Terminating load impedance : 50Ω : 50Ω
Minimum Center Frequency ( Fc ) Insertion Loss (Fc +/- 9.5 MHz) Amplitude Ripple (Fc +/- 9.5 MHz) Absolute Group Delay at Fc Group Delay Variation (Fc +/- 9.5 MHz) VSWR (Fc +/- 9.5 MHz) Relative Attenuation … ~ Fc - 35 MHz Fc + 70 MHz ~ … Temperature Coefficient of Frequency MHz dB dB nsec nsec -
Typical 815.5 3.5 1.0 35 15 1.5
Maximum 4.0 2.0 2.0
dB
45 45 -
50 50 -80
-
ppm/°C
-
Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F8152 2004-09-30 DR3002-PS02 2/7
www.DataSheet4U.net
SAW Bandpass Filter F8152
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input 50Ω
Output 50Ω
Marking Configuration
ITF1) 81522)
1) Manufacturer name 2) Marking Number
* Ink or Laser Marking available
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F8152 2004-09-30 DR3002-PS02 3/7
www.DataSheet4U.net
SAW Bandpass Filter F8152
Typical Performance ( at 25℃ )
16 Apr 2004 03:06:45 2: . 44000 dB 19. 000 000 MHz
CH1
S21
LOG
10 dB/
REF 0 dB
2 1
PRm
CH1 Markers Cor mean : -3 . 4062 dB s. dev : . 21270 dB p-p : . 80320 dB
REF=1
CENTER 815 . 500 000 MHz
SPAN 400 . 000 000 MHz
CH1
S21
LOG
10 dB/
REF 0 dB
1
16 Apr 2004 03:15:27 1: -4 . 1362 dB 815 . 500 000 MHz
PRm
C
START
. 030 000 MHz
STOP 2 000 . 000 000 MHz
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F8152 2004-09-30 DR3002-PS02 4/7
www.DataSheet4U.net
SAW Bandpass Filter F8152
Input / Output VSWR Charts
CH1
S11
SWR
1 /
REF 1
16 Apr 2004 03:13:31 1: 1. 4769 815 . 500 000 MHz
CH1
S22
SWR
1 /
REF 1
16 Apr 2004 03:13:44 1: 1. 5381 815 . 500 000 MHz
PRm
PRm
Cor
Cor
1
1
CENTER 815 . 500 000 MHz
SPAN 400 . 000 000 MHz
CENTER 815 . 500 000 MHz
SPAN 400 . 000 000 MHz
Input / Output Smith Charts
CH1
S11
1 U FS
1: 35. 477
-7 . 9355
16 Apr 2004 03:13:12 24. 593 pF 815 . 500 000 MHz
CH1
S22
1 U FS
1: 35. 150
-10 . 533
16 Apr 2004 03:13:22 18. 528 pF 815 . 500 000 MHz
PRm
PRm
Cor
Cor
1
1
CENTER 815 . 500 000 MHz
SPAN 400 . 000 000 MHz
CENTER 815 . 500 000 MHz
SPAN 400 . 000 000 MHz
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F8152 2004-09-30 DR3002-PS02 5/7
www.DataSheet4U.net
SAW Bandpass Filter F8152
Packing Specification
1. Reeling Quantity : 1000 pcs / reel 2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min.
END START
Tape Running Direction
2. Tensile strength of carrier tape 4.4N/mm width
Top cover tape Direction of pull
3. Top cover tape adhesion 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g
Carrier tape
0~15 degree
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F8152 2004-09-30 DR3002-PS02 6/7
www.DataSheet4U.net
SAW Bandpass Filter F8152
Carrier Tape Dimensions [unit : mm]
A B C D E F
4.30 ± 0.1 4.30 ± 0.1 7.25 ± 0.1 1.70 ± 0.1 12.00 ± 0.1 8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : m.