Document
Toshiba Matsushita Display Technology Co., Ltd
PRODUCT INFORMATION
38cm COLOUR TFT-LCD MODULE (15.0 TYPE)
LTM15C458T (a-Si TFT)
All information is subject to change without notice. Please read bottom notes.
FEATURES
(1) (2) (3) (4) 15.0 type XGA display size for monitor 8bit(6bit+FRC) Data Signal with 1ch-LVDS interface system Wide Viewing Angle (Upper+Lower (140°)/ Left+Right (160°)) 16.19M Colors Display
TENTATIVE
MECHANICAL SPECIFICATIONS
Item Dimensional Outline (typ.) Number of Pixels Active Area Pixel Pitch Weight (approximately) Backlight Specifications 331.6(W) x 254.7(H) x 13.5max(D) mm 1024(W) x 768(H) pixels 304.128(W) x 228.096(H) mm 0.297(W) x 0.297(H) 1210g 4 CCFL, Sidelight type
ABSOLUTE MAXIMUM RATINGS
Item Supply Voltage (VDD) (VFL) FL Driving Frequency (fFL) Input Signal Voltage (VIN) Operating Temperature Storage Temperature Storage Humidity Min. -0.3 0 -0.3 0 -20 10 Max. 4.0 2.7 100 VDD+0.3 50 60 90 Unit V kV(rms) kHz V °C °C %(RH)
ELECTRICAL SPECIFICATION (RECOMMENDED OPERATION CONDITION)
Item Supply Voltage (VDD) (VFL) Min. 3.0 --1500 100 1.0 --3.0 --Typ. 3.3 650 ------380 --16.9 Max. 3.6 --2000 600 2.4 - 1/2 x VID --6.5 --Unit V V(rms) V(rms) mV V mA mA(rms) W Remarks IFL=6.0mA(rms)
FL Start Voltage (Ta=0°C) Differential Input Voltage(VID)*1 Common Mode Input Voltage(VCM)*1 Current Consumption (IDD) *2 (IFL) *3 *2 *3 Power Consumption (Target)
IFL=6.0mA(rms)
*1 : Refer to THC63LVDM83A/F84A Specification by THine Electronics, Inc. *2 : 8 color bars pattern *3 : Excepting the efficiency FL inverter
OPTICAL SPECIFICATION (Ta=25°C)
Item Luminance Contrast Ratio (CR) Viewing Angle (Upper+Lower) (CR>=10) (Left+Right) Response Time τr + τf Lamp Life Time (MTBF)*4 *5 Min. ----------Typ. 350 400 140 160 25 50,000 Max. ----------Unit 2 cd/m --° ° ms h Remarks IFL=6.0mA(rms)
*4 : Conditions ;Ta=25°C, IFL=6.0mA(rms), continuous lighting *5 : Definitions of failure ; 1) Lcd luminance becomes half of the minimum value. 2) Lamp doesn’t light normally. *The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by Toshiba Matsushita Display Technology or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Toshiba Matsushita Display Technology or others. *The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba Matsushita Display Technology before proceeding with the design of equipment incorporating this product.
www.DataSheet4U.net
(1/12)
2003-11-28 (Ver. 2.1R)
LTM15C458T
Unit: mm
DIMENSIONAL OUTLINE(front figure)
TENTATIVE
Standard tolerance: 0.5
3
(2/12)
2003-11-28 (Ver. 2.1R)
LTM15C458T
Unit: mm
DIMENSIONAL OUTLINE(back figure)
TENTATIVE
Standard tolerance: 0.5
(3/12)
2003-11-28 (Ver. 2.1R)
LTM15C458T BLOCK DIAGRAM
FL FL C N1
Connec to r Pane l Cn t ro l le r & LV DS XD r ive r IC
C.