NCV8460

NCV8460 Self Protected High Side Driver with Temperature Shutdown and Current Limit The NCV8460 is a fully protected High−Side driver that can be used to switch a wide variety of loads, such as bulbs, solenoids and other acuators. The device is internally protected from an overload condition by an active current limit and thermal shutdown. A diagnostic output reports ON and OFF state open load conditions as well as thermal shutdown. Features 8 1 V8460 A L Y W G http://onsemi.com MARKING DIAGRAM 8 SO−8 D SUFFIX CASE 751 1 V8460 ALYW G Short Circuit Protection Thermal Shutdown with Automatic Restart CMOS (3.3 V / 5 V) compatible control input Open Load Detection in On and Off State Diagnostic Output Undervoltage and Overvoltage Shutdown Loss of Ground Protection ESD protection Slew Rate Control for Low EMI Switching Very Low Standby Current NCV Prefix for Automotive and Other Applications Requiring AEC−Q100 Qualified Site and Change Controls These are Pb−Free Devices = Specific Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package PIN CONNECTIONS GND 1 IN 2 STAT 3 NC 4 (Top View) 8 7 6 5 VD OUT OUT VD Typical Applications Switch a Variety of Resistive, Inductive and Capacitive Loads Can Replace Electromechanical Relays and Discrete Circuits Automotive / Industrial ORDERING INFORMATION Device NCV8460DR2G Package SOIC−8 (Pb−Free) Shipping† 1000 / Tape & Reel †For information on tape and reel specifications, includi...