High Performance LVPECL Oscillator
CY2XF34
High Performance LVPECL Oscillator with Frequency Margining – Pin Control
High Performance LVPECL Oscillator wi...
Description
CY2XF34
High Performance LVPECL Oscillator with Frequency Margining – Pin Control
High Performance LVPECL Oscillator with Frequency Margining - Pin Control
Features
■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Functional Description
The CY2XF34 is a high performance and high frequency Crystal Oscillator (XO). It uses a Cypress proprietary low noise PLL to synthesize the frequency from an integrated crystal. The output frequency can be changed through two select pins, allowing easy frequency margin testing in applications. The CY2XF34 is available as a factory configured device or as a field programmable device.
Low Jitter Crystal Oscillator (XO) Less than 1 ps Typical RMS Phase Jitter Differential LVPECL Output Output Frequency from 50 MHz to 690 MHz Two Frequency Margining Control Pins (FS0, FS1) Factory Configured or Field Programmable Integrated Phase-Locked Loop (PLL) Supply Voltage: 3.3 V or 2.5 V Pb-Free Package: 5.0 × 3.2 mm LCC Commercial and Industrial Temperature Ranges
Logic Block Diagram
4 CRYSTAL OSCILLATOR LOW-NOISE PLL OUTPUT DIVIDER 5 FS1 1
FREQUENCY SELECT DECODE
CLK
CLK#
FS0
2
Pinouts
Figure 1. Pin Diagram - 6-pin Ceramic LCC
FS1 1 FS0 2 VSS 3
6 VDD 5 CLK# 4 CLK
Pin Definitions
Pin 1, 2 4, 5 6 3 Name FS1, FS0 CLK, CLK# VDD VSS I/O Type CMOS input LVPECL output Power Power Frequency select Differential output clock Supply voltage: 2.5 V or 3.3 V Ground Description
www.DataSheet4U.net
Cypress Semiconductor Corporation Document Number: 001-53149 Rev. *E
198 Champion ...
Similar Datasheet