CCFL Programmable Inverter Module
PanelMatch™
TM ®
LXMG1626-12-67
12V 10W Dual CCFL Programmable Inverter Module
P RODUCTION D ATA S HEET
DESCRIPTION
...
Description
PanelMatch™
TM ®
LXMG1626-12-67
12V 10W Dual CCFL Programmable Inverter Module
P RODUCTION D ATA S HEET
DESCRIPTION
KEY FEATURES
WWW . Microsemi . C OM
The LXMG1626-12-67¹ is a 10W dual Output Direct Drive™ CCFL (Cold Cathode Fluorescent Lamp) Inverter Module www.DataSheet4U.net specifically designed to be compatible with a variety of LCD panels the have both lamps on one side of the panel and use a single common lamp return wire. LXMG1626 modules provide the designer with a vastly superior display brightness range. This brightness range is achievable with virtually any LCD display. The modules are available with a dimming input that permits brightness control from a Direct Current voltage source, a PWM signal, or external Potentiometer. The maximum output current is externally programmable (through the input connector) over a range of 10 to 14mA in steps. This allows the inverter to match the panel’s lamp current specifications, or it can be used to purposely drive the lamps at a lower or higher current to decrease or increase nominal brightness. RangeMAX™ Digital Dimming Technique provides flicker-free brightness control in any
wide range typically (100:1+) dimming application. The design of the resultant “burst drive” that energizes the lamp specifically ensures that no premature lamp degradation occurs, while allowing significant power savings at lower dim levels. The modules convert DC voltage from the system battery or AC adapter directly to high frequency, high...
Similar Datasheet