Document
HD74LV1G14A
Inverter with Schmitt–trigger Input
REJ03D0067-0700 Rev.7.00 Mar 21, 2008
www.DataSheet4U.net
Description
The HD74LV1G14A has an inverter with schmitt–trigger input in a 5 pin package. Low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life.
Features
• The basic gate function is lined up as Renesas uni logic series. • Supplied on emboss taping for high-speed automatic mounting. • Electrical characteristics equivalent to the HD74LV14A Supply voltage range : 1.65 to 5.5 V Operating temperature range : –40 to +85°C • All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V) • Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V) • All the logical input has hysteresis voltage for the slow transition. • Ordering Information
Part Name HD74LV1G14ACME HD74LV1G14AVSE Note: Package Type CMPAK–5 pin VSON–5 pin Package Code (Previous Code) PTSP0005ZC-A (CMPAK-5V) PUSN0005KA-A (TNP-5DV) Package Abbreviation CM VS Taping Abbreviation (Quantity) E (3000 pcs/reel) E (3000 pcs/reel)
Please consult the sales office for the above package availability.
Outline and Article Indication
• HD74LV1G14A
Index band
Marking
L
A
CMPAK–5
= Control code
REJ03D0067-0700 Rev.7.00, Mar 21, 2008 Page 1 of 7
HD74LV1G14A
Outline and Article Indication
• HD74LV1G14A
Marking
L
A
VSON–5
= Control code
Function Table
Input A H L H : High level L : Low level Output Y L H
Pin Arrangement
NC
1
5
VCC
IN A
2
GND
3
4
OUT Y
(Top view)
REJ03D0067-0700 Rev.7.00, Mar 21, 2008 Page 2 of 7
HD74LV1G14A
Absolute Maximum Ratings
Item Supply voltage range Input voltage range *1 Output voltage range *1, 2 Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation *3 at Ta = 25°C (in still air) Storage temperature Notes: Symbol VCC VI VO IIK IOK IO ICC or IGND PT Tstg Ratings –0.5 to 7.0 –0.5 to 7.0 –0.5 to VCC + 0.5 –0.5 to 7.0 –20 ±50 ±25 ±50 200 –65 to 150 Unit V V V mA mA mA mA mW °C Test Conditions
Output : H or L VCC : OFF VI < 0 VO < 0 or VO > VCC VO = 0 to VCC
The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Recommended Operating Conditions
Item Supply voltage range Input voltage range Output voltage range Symbol VCC VI VO Min 1.65 0 0 — — — — — — — — –40 Max 5.5 5.5 VCC 1 2 6 12 –1 –2 –6 –12 85 Unit V V V Conditions
IOL Output current IOH
mA
VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V
Operating free-air temperature Note:
Ta
°C
Unused or floating inputs must be held high or low.
REJ03D0067-0700 Rev.7.00, Mar 21, 2008 Page 3 of 7
HD74LV1G14A
Electrical Characteristic
• Ta = –40 to 85°C
Item Symbol VCC (V) * 1.65 to 1.95 2.5 3.3 5.0 1.65 to 1.95 2.5 3.3 5.0 1.65 to 1.95 2.5 3.3 5.0 Min to Max 1.65 2.3 3.0 Output voltage 4.5 Min to Max 1.65 2.3 3.0 4.5 0 to 5.5 5.5 0 3.3 Min — — — — VCC×0.25 0.75 0.99 1.5 0.1 0.25 0.33 0.5 VCC–0.1 1.4 2.0 2.48 3.8 — — — — — — — — — Typ — — — — — — — — — — — — — — — — — — — — — — — — — 3.0 Max VCC×0.75 1.75 2.31 3.50 — — — — VCC×0.4 1.0 1.32 2.0 — — — — — 0.1 0.3 0.4 0.44 0.55 ±1 10 5 — V Unit Test condition
VT+
Threshold voltage
VT–
V
∆VT
VOH
IOH = –50 µA IOH = –1 mA IOH = –2 mA IOH = –6 mA IOH = –12 mA IOL = 50 µA IOL = 1 mA IOL = 2 mA IOL = 6 mA IOL = 12 mA VIN = 5.5 V or GND VIN = VCC or GND, IO = 0 VIN or VO = 0 to 5.5 V VIN = VCC or GND
VOL
Input current Quiescent supply current Output leakage current Input capacitance Note:
IIN ICC IOFF CIN
µA µA µA pF
For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
REJ03D0067-0700 Rev.7.00, Mar 21, 2008 Page 4 of 7
HD74LV1G14A
Switching Characteristics
• VCC = 1.8 ± 0.15 V
Item Propagation delay time Symbol tPLH tPHL Ta = 25°C Min Typ Max — 16.8 32.0 — 23.8 43.0
Ta = –40 to 85°C
Min 1.0 1.0
Max 34.0 46.0
Unit ns
Test Conditions CL = 15 pF CL = 50 pF
FROM (Input) A
TO (Output) Y
• VCC = 2.5 ± 0.2 V
Item Propagation delay time Symbol tPLH tPHL Min — — Ta = 25°C Typ Max 10.5 19.7 14.0 24.0
Ta = –40 to 85°C
Min 1.0 1.0
Max 22.0 27.0
Unit ns
Test Conditions CL = 15 pF CL = 50 pF
FROM (Input) A
TO (Output) Y
• VCC = 3.3 ± 0.3 V
Item Propagation delay time Symbol tPLH tPHL Ta = 25°C Min — — Typ 8.3 10.8 Max 12.8 16.3
Ta = –40 to 85°C
Min 1.0 1.0
Max 15.0 18.5
Unit ns
Test Conditions CL = 15 pF CL = 50 pF
FROM (Input) A
TO (Output) Y
• VCC = 5.0 ± 0.5 V
Item.