Document
APT28M120B2 APT28M120L
1200V, 29A, 0.53Ω Max
N-Channel MOSFET
Power MOS 8™ is a high speed, high voltage N-channel switch-mode power MOSFET. A proprietary planar stripe design yields excellent reliability and manufacturability. Low switching loss is achieved with low input capacitance and ultra low Crss "Miller" capaciwww.DataSheet4U.net tance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control slew rates during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. Reliability in flyback, boost, forward, and other circuits is enhanced by the high avalanche energy capability.
T-MaxTM
TO-264
APT28M120B2
APT28M120L
D
Single die MOSFET
G S
FEATURES
• Fast switching with low EMI/RFI • Low RDS(on) • Ultra low Crss for improved noise immunity • Low gate charge • Avalanche energy rated • RoHS compliant
TYPICAL APPLICATIONS
• PFC and other boost converter • Buck converter • Two switch forward (asymmetrical bridge) • Single switch forward • Flyback • Inverters
Absolute Maximum Ratings
Symbol ID IDM VGS EAS IAR Parameter Continuous Drain Current @ TC = 25°C Continuous Drain Current @ TC = 100°C Pulsed Drain Current Gate-Source Voltage Single Pulse Avalanche Energy 2 Avalanche Current, Repetitive or Non-Repetitive
1
Ratings 29 18 104 ±30 2165 14
Unit
A
V mJ A
Thermal and Mechanical Characteristics
Symbol PD RθJC RθCS TJ,TSTG TL WT Characteristic Total Power Dissipation @ TC = 25°C Junction to Case Thermal Resistance Case to Sink Thermal Resistance, Flat, Greased Surface Operating and Storage Junction Temperature Range Soldering Temperature for 10 Seconds (1.6mm from case) 0.22 Package Weight 6.2 10 Torque Mounting Torque ( TO-264 Package), 4-40 or M3 screw 1.1 MicrosemiWebsite-http://www.microsemi.com N·m -55 0.11 150 °C 300 oz g in·lbf
04-2009 050-8097 Rev B
Min
Typ
Max 1135 0.11
Unit W °C/W
Static Characteristics
Symbol
VBR(DSS) ΔVBR(DSS)/ΔTJ RDS(on) VGS(th) ΔVGS(th)/ΔTJ IDSS IGSS
TJ = 25°C unless otherwise specified
Test Conditions
VGS = 0V, ID = 250µA Reference to 25°C, ID = 250µA VGS = 10V, ID = 14A VGS = VDS, ID = 2.5mA VDS = 1200V VGS = 0V TJ = 25°C TJ = 125°C
APT28M120B2_L
Typ 1.41 0.45 4 -10 Max Unit V V/°C Ω V mV/°C µA nA
Parameter
Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Drain-Source On Resistance
3
Min 1200
Gate-Source Threshold Voltage Threshold Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Source Leakage Current
3
0.53 5 100 500 ±100
VGS = ±30V
Dynamic Characteristics
Symbol
gfs Ciss Crss Coss Co(cr) Co(er) Qg Qgs Qgd td(on) tr td(off) tf
4
TJ = 25°C unless otherwise specified
Test Conditions VDS = 50V, ID = 14A
VGS = 0V, VDS = 25V f = 1MHz
Parameter
Forward Transconductance Input Capacitance Reverse Transfer Capacitance Output Capacitance Effective Output Capacitance, Charge Related
Min
Typ 31 9670 115 715 275
Max
Unit S
pF
VGS = 0V, VDS = 0V to 800V
5
Effective Output Capacitance, Energy Related Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time
VGS = 0 to 10V, ID = 14A, VDS = 600V Resistive Switching VDD = 800V, ID = 14A RG = 2.2Ω 6 , VGG = 15V
140 300 50 140 50 31 170 48
nC
ns
Source-Drain Diode Characteristics
Symbol
IS ISM VSD trr Qrr dv/dt
Parameter
Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Peak Recovery dv/dt
Test Conditions
MOSFET symbol showing the integral reverse p-n junction diode (body diode)
Min
D
Typ
Max 29
Unit
G S
A 104 1 1290 33 10 V ns µC V/ns
ISD = 14A, TJ = 25°C, VGS = 0V ISD = 14A 3 diSD/dt = 100A/µs, TJ = 25°C ISD ≤ 14A, di/dt ≤1000A/µs, VDD = 100V, TJ = 125°C
1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25°C, L = 22.09mH, RG = 2.2Ω, IAS = 14A. 3 Pulse test: Pulse Width < 380µs, duty cycle < 2%. 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -4.40E-7/VDS^2 + 5.34E-8/VDS + 7.59E-11. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452)
Microsemi reserves the right to change, without notice, the specifications and information contained herein. Rev B 050-8097
04-2009
APT28M120B2_L
90
V
GS
30
= 10V T = 125°C
J
80 25 ID, DRAIN CURRENT (A) ID, DRIAN CURRENT (A) 70
TJ = -55°C
V
GS
= 6, 7, 8 & 9V
60 50 40
TJ = 25°C
20
15
5V
30 20 10 0
TJ = 125°C TJ = 150°C
10
5 0
4.5V
0 5 10 15 20 25 30 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) Figure 1, Output Characteristics
0
5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 2, Output Characteristics
.