DatasheetsPDF.com

SC842110 Dataheets PDF



Part Number SC842110
Manufacturers celduc-relais
Logo celduc-relais
Description Power Solid State Relay
Datasheet SC842110 DatasheetSC842110 Datasheet (PDF)

S/MON/SC842110/A/17/02/2000 page 1 /2 F/GB Relais statique monophasé de puissance Power Solid State Relay • Sortie AC synchrone : 12-280VAC-25A • Possibilité de protection IP20 en option : Capot 1K460000 • Adapté à tout type de charges • 12-280VAC -25A Zero-Cross AC Output. • IP20 Protection optional (1K460000). • Designed for all types of loads. Dimensions/Size 27 22,8 ±0,5 SC842110 4-30VDC control 25A/230VAC output Application typique/Typical application 12-280VAC 28 Ø4,7 M4 protection ré.

  SC842110   SC842110


Document
S/MON/SC842110/A/17/02/2000 page 1 /2 F/GB Relais statique monophasé de puissance Power Solid State Relay • Sortie AC synchrone : 12-280VAC-25A • Possibilité de protection IP20 en option : Capot 1K460000 • Adapté à tout type de charges • 12-280VAC -25A Zero-Cross AC Output. • IP20 Protection optional (1K460000). • Designed for all types of loads. Dimensions/Size 27 22,8 ±0,5 SC842110 4-30VDC control 25A/230VAC output Application typique/Typical application 12-280VAC 28 Ø4,7 M4 protection réseau line protection 19,6 1~ 58,2 43,2 2~ 47,6 Entrée control 4-30VDC 4- 1 47,5 3+ + 5,1 3+ 2 25,8 TOLERANCES ± 0,3 25,4 44,5 M3 * 1-2 peuvent être inversées/ 1 -2 can be changed * le relais doit être monté sur dissipateur thermique / SSR must be mounted on a heatsink * option : couvercle de protection des bornes : 1K460 000 / cover : 1K460 000 CHARGE/ LOAD Caractéristiques de commande (à 20°C) / Control characteristics (at 20°C) Paramètre / Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc ) Tension de relachement/Release voltage Résistance interne / Input internal resistor fig.1 Tension inverse / Reverse voltage Symbol Uc Ic Uc off Rc Urv Min 4 3 1 DC Nom Max 30 30 Unit V mA V Ω V VRMS VRMS V 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 fig. 1 :Caractéristique d'entrée / Control characteristic fig1 : Caractéristique d'entrée / Control characteristic 1000 30 Caractéristiques d'entrée-sortie (à 20°C) / Input-output characteristics (at 20°C) Isolement entrée-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 2500 Tension assignée Isolement/Rated impulse voltage Uimp 4000 Caractéristiques générales / General characteristics Paramètre / Parameter Poids/Weight Plage de température de stockage / Storage température range Plage de température de fonctionnement/Operating température range Ic (mA) 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Uc (V) Conditions Symbol Typ. 90 -40 / +100 -40 / +100 Unit g °C °C Proud to serve you www.DataSheet4U.com All technical caracteristics are subject to change without previous notice. Caractéristiques sujettes à modifications sans préavis. celduc r e l a i  s S/MON/SC842110/A/17/02/2000 Caractéristiques de sortie(à 20°C) / Output characteristics (at 20°C) Paramètre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crête / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorçage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant nominal AC-53/ AC-53 nominal current Courant de surcharge non répétitif /Non repetitive overload current Chute tension directe crête/ On state voltage drop Courant de fuite état bloqué/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de fréquence / Operating frequency range dv/dt état bloqué / Off state dv/dt dI/dt maximum non répétitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunité conduite / Conducted immunity level EMC Test d'immunité conduite / Conducted immunity level Conformité / Conformity Pd ( watts) 40 35 30 25 20 15 10 5 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 0 10 20 page 2 / 2 F/GB Conditions Symbol Typ. Unit Ue 230 V rms Uemin-max 12-280 V rms Up 600 V Usync 12 V Ua 8 V Ie AC-51 25 A rms Ie AC-53 5 A rms Itsm 240 A Vd 1,2 V Ilk <3 mA Ie min 5 mA ton max 10 ms toff max 10 ms f 0,1-440 Hz dv/dt 500 V/µs di/dt 50 A/µs I2t 288 A2s 2kV criterion A 2kV crit.A with external VDR Ie nom ( see Fig. 2 ) ( see Fig. 2 ) tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz IEC 1000-4-4 (burst) IEC 1000-4-5(schocks) EN60947-4-x Fig. 2 Courbes thermiques / Thermal characteristics 0,95K/W 1,1K/W Full on state 1,6K/W 2,2K/W 0,75K/W T case max (°C) 70 80 90 50% on state 6K/W 100 30 40 50 60 70 80 90 100 110 120 RMS load current : I (A) Ambient temperature : Tamb (°C) Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modéle 25A(Itsm=230A) Surge current : Itsm (Apeak) = f(t) for 25A models with Itsm =230A 250 Itsm (Apeak) 200 150 100 50 0 Surcharge de courant non répétitive sans tension réappliquée / No repetive surge current without voltage reapplied. Surcharge de courant répétitive avec tension réappliquée Repetive surge current with voltage reapplied. 1 -Itsm non répétitif sans tension réappliquée est donné pour la détermination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm répétitif est donné pour des surcharges de courant (Tj initiale=70°C). La répétition de ces surcharges de courant diminue la durée de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70°C. The repetition of the surge current decrease the lifetime SSR's . 0,01 0,1 t(s) 1 10 Précautions : * Les relais à semiconducteurs ne procure.


TS1620 SC842110 SC842910


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)