LSJ500

LSJ500 Current Regulator Diode Linear Systems replaces discontinued Siliconix J500 The Linear Systems LSJ500 is a ± 20% range current regulator The LSJ500 is a ±20% range current regulator designed for demanding applications in test equipment and instrumentation. The LSJ500 utilizes JFET techniques to produce a single twoleaded device which is extremely simple to operate. Two-Lead Plastic Package Guaranteed ±20% Tolerance Operation up to 45V Excellent Temperature Stability Simple Series Circuitry, No Separate Voltage Source Tight Guaranteed Circuit Performance Excellent Performance in Low-Voltage/Battery Circuits and High-Voltage Spike Protection High Circuit Stability vs. Temperature www.DataSheet4U.com 350mW LSJ500 Applications: Constant-Current Supply Current-Limiting Timing Circuits 45V SPECIFIC ELECTRICAL CHARACTERISITCS @ 25ºC (unless otherwise stated) LSJ500 LSJ500 Availability: SOT-23 Bare die Please contact Micross for full package and die dimensions Notes: 1. Absolute maximum ratings are limiting values above which serviceability may be impaired. 2. Pulsed, t = 2ms. Maximum VF where IF < 1.1IF(max). 3. Pulsed, t = 2ms. Continuous currents may vary. 4. Pulsed, t = 2ms. Continuous impedances may vary. 5. Min VF required to ensure IF = 0.8IF(min). Tel: +44 1603 788967 Email: chipcomponents@micross.com Web: http://www.micross.com/distribution Information furnished by Linear Integrated Systems and Micross Components is believed to be accu...