MTL7743

DIN rail mounting safety barriers MTL7700 SERIES ◆◆ Removable terminals ◆◆ Bussed power feed to other modules ◆◆ Relay and solid state switch modules ◆◆ Dual channel variants — 6.3mm per channel Since its introduction in 1984 the MTL700 Series barrier has established itself as the worldwide standard for safety barriers. Known for its quality and reliability, the MTL700 Series is widely used in applications all over the world. www.DataSheet4U.net ◆◆ Proximity detector inputs ◆◆ Electronic fusing ◆◆ Direct replacement for MTL700 Series barriers ◆◆ Compatible terminal numbering and safety descriptions MTL7700 active modules are protected with an electronic fuse for the majority of applications. The MTL7798 active fused, power feed module can protect up to 40 other modules using the bussed power facility and provides a clear indication of a trip condition via a red LED. The MTL774X range of barriers offer a NAMUR compatible input and a choice of relay or solid state output. The solid state outputs are floating so switching to ground or from a power rail into an input is also possible. The solid state interface also provides a high frequency transfer for use in flow or rotation applications. Dual channel relay or solid state modules offer the highest packing density with only 6.3mm per channel and when used in conjunction with the power bus, offer users the minimum of wiring with the maximum packing density and the lowest cost per channel. The MTL7700 Series follows ...