DDR SDRAM Module 1024Mbyte
HANBit
HDD128M72D18RPW
DDR SDRAM Module 1024Mbyte (128Mx72bit), based on 64Mx8, 4Banks, 8K Ref., 184Pin-DIMM with PLL &...
Description
HANBit
HDD128M72D18RPW
DDR SDRAM Module 1024Mbyte (128Mx72bit), based on 64Mx8, 4Banks, 8K Ref., 184Pin-DIMM with PLL & Register Part No. HDD128M72D18RPW
GENERAL DESCRIPTION
The HDD128M72D18RPW is a 128M x 72 bit Double Data Rate(DDR) Synchronous Dynamic RAM high-density memory module. The module consists of eighteen CMOS 64M x 8 bit with 4banks DDR SDRAMs in 66pin TSOP-II 400mil packages and 2K EEPROM in 8-pin TSSOP package on a 184-pin glass-epoxy. Four 0.1uF decoupling capacitors are mounted on the printed circuit board in parallel for each DDR SDRAM. The HDD128M72D18RPW is a DIMM( Dual in line Memory Module) .Synchronous design allows precise cycle c ontrol with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operating frequencies, programmable latencies and burst lengths allows the same device to be useful for a variety of high bandwidth, high performance mem ory system applications. All module components may be powered from a single 2.5V DC power supply and all inputs and outputs are SSTL_2 compatible.
FEATURES
Part Identification HDD128M72D18RPW – 13A HDD128M72D18RPW – 13B HDD128M72D18RPW – 16B : : : 133MHz (CL=2) 133MHz (CL=2.5) 166MHz (CL=2.5)
1024MB(64Mx72) Registered DDR DIMM based on 64Mx8 DDR SDRAM 2.5V ± 0.2V VDD and VDDQ power supply Auto & self refresh capability (8K Cycles / 64ms) All input and output are compatible with SSTL_2 interface Data(DQ), Data strobes and write masks latched on the rising and...
Similar Datasheet