28V Programmable Current-Limited Load Switch
AOZ1360
28V Programmable Current-Limited Load Switch
General Description
The AOZ1360 is a high-side load switch intende...
Description
AOZ1360
28V Programmable Current-Limited Load Switch
General Description
The AOZ1360 is a high-side load switch intended for applications that require circuit protection. The device operates from a source voltage between 5.5V and 28V. The internal current limiting circuit protects the input supply voltage from large current load. The current limit can be set with an external resistor. The AOZ1360 provides thermal protection function that limits excessive power dissipation. The device employs internal soft-start circuitry to control in-rush current due to highly capacitive loads associated with hot-plug events. It features low quiescent current of 220µA and the supply current reduces to less than 1µA at shutdown.
The AOZ1360 is available in either an SO-8 or a DFN-10 4 mm x 4 mm package which can operate over a -40C to +85C temperature range.
Features
35m maximum on resistance Programmable current limit 5.5V to 28V operating input voltage Low quiescent current Under-voltage lockout Thermal shutdown protection 2.5kV ESD rating Available in SO-8 or DFN-10 package
Applications
Notebook PCs Hot swap supplies
Typical Application
VIN
CIN 1μF
OFF ON
CSS 1nF
IN
OUT
AOZ1360
EN
SET
SS
GND
VOUT
COUT 1μF
RSET 84.5k
Rev. 2.2 February 2024
www.aosmd.com
Page 1 of 15
AOZ1360
Ordering Information
Part Number
Package
Temperature Range
Environmental
AOZ1360AIL AOZ1360DIL
SO-8 DFN4x4-10
-40 °C to +85 °C
Green Product
AOS products are offered in ...
Similar Datasheet