Voltage Controlled SAW Oscillator
VS-702
Voltage Controlled SAW Oscillator Previous Vectron Model VS-720
VS-702
Description
The VS-702 is a SAW Based Vol...
Description
VS-702
Voltage Controlled SAW Oscillator Previous Vectron Model VS-720
VS-702
Description
The VS-702 is a SAW Based Voltage Controlled Oscillator that achieves low phase noise and very low jitter performance. The VS702 is housed in an industry standard hermetically sealed LCC package and available in tape and reel.
Features
Industry Standard Package, 5.0 x 7.5 x 2.0 mm ASIC Technology for Ultra Low Jitter 0.100 ps-rms typical across 12 kHz to 20 MHz BW 0.120 ps-rms typical across 50 kHz to 80 MHz BW Output Frequencies from 150 MHz to 1 GHz 3.3 V Operation LV-PECL or LVDS Configuration with Fast Transition Times Improved Temperature Stability over Standard VCSO (±20 ppm) Output Disable Feature 0/70°C or -40/85°C operating temperature Product is free of lead and compliant to EC RoHS Directive
Applications
Ideal for PLL circuits for clock smoothing and frequency translation
SONET, SDH Synchronous Ethernet Fiber Channel LAN / WAN Test and Measurement
Block Diagram
Complementary Output Output VDD
BAW
www.DataSheet4U.com
SAW
VC
E/D
Gnd
Vectron International 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 http://www.vectron.com
Page1
Performance Specifications
Table 1. Electrical Performance Parameter
Voltage1 Current (No Load) Nominal Frequency Linearity3 Gain Transfer Positive (See pg 5) Temperature Stability3 Mid Level
3 3 2
Symbol
VDD IDD
Min
Supply 2.97 Frequency
Typical
3.3 55
Maximum
3.63 70 1000
Units
V mA MHz ppm % ppm...
Similar Datasheet