Crystal Oscillator
VS-700
Voltage Controlled SAW Oscillator
VS-700
Description
The VS-700 is a SAW based voltage controlled oscillator tha...
Description
VS-700
Voltage Controlled SAW Oscillator
VS-700
Description
The VS-700 is a SAW based voltage controlled oscillator that operates at the fundamental frequency of the internal SAW filter. The SAW filter is a high-Q quartz device that enables the circuit to achieve low phase jitter performance over a wide operating temperature range. The oscillator is housed in a hermetically sealed leadless surface mount package offered on tape and reel. It has an output disable to facilitate on-board testing.
Features
Industry Standard Package, 5.0 x 7.5 x 2.5 mm Output Frequencies from 500 MHz to 850 MHz 3.3 V Operation Low Jitter < 0.25 ps-rms across 50 kHz to 80 MHz LV-PECL Configuration with Fast Transition Times Complementary Outputs Output Disable Feature Product is free of lead and compliant to EC RoHS Directive
Applications
PLL circuits for clock smoothing and frequency translation Description Standard
1-2-4 Gigabit Fibre Channel 10 Gigabit Fibre Channel 10GbE LAN / WAN OC-192 SONET / SDH WiMax INCITS 352-2002 INCITS 364-2003 IEEE 802.3ae ITU-T G.709 GR-253-CORE Issue4 IEEE 802.16
Block Diagram
Vcc COutput Output
www.DataSheet4U.com
SAW
Vc
OD
Gnd
Page1 of 7 Vectron International 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 http://www.vectron.com
Rev: 08Dec2009
Performance Specifications
Electrical Performance Parameter Voltage
Current (No Load)
Symbol VCC ICC
Min Supply
2.97
Typical
3.3 55
Maximum
3.63 70
Units
V mA
Notes
2,...
Similar Datasheet