HSD4M64B4

HANBit HSD4M64B4 Synchronous DRAM Module 32Mbyte (4Mx64-Bit), SO-DIMM, 4Banks, 4K Ref., 3.3V Part No. HSD4M64B4 GENERAL DESCRIPTION The HSD4M64B4 is a 4M x 64 bit Synchronous Dynamic RAM high density memory module. The module consists of four CMOS 1M x 16 bit with 4banks Synchronous DRAMs in TSOP-II 400mil packages on a 144-pin glass-epoxy substrate. Two 0.1uF decoupling capacitors are mounted on the printed circuit board in parallel for each SDRAM. The HSD4M64B4 is a SO-DIMM(Small Outline Dual in line Memory Module) and is intended for mounting into 144-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. I/O transactions are possible on every clock cycle. Range of operating frequencies, programmable latencies allows the same device to be useful for a variety of high bandwidth, high performance memory system applications All module components may be powered from a single 3.3V DC power supply and all inputs and outputs are LVTTL-compatible. FEATURES Part Identification HSD4M64B4-F/10 :100MHz ( CL=2) HSD4M64B4-F/10L :100MHz ( CL=3) HSD4M64B4-F/12 :125MHz ( CL=3) HSD4M64B4-F/13 :133Mhz (CL=3) * F : Auto Self-Refresh with Low Power Burst mode operation Auto & self refresh capability (4096 Cycles/64ms) LVTTL compatible inputs and outputs Single 3.3V ±0.3V power supply MRS cycle with address key programs - Latency (Access from column address) - Burst length (1, 2, 4, 8 & Full page) - Data scramble (Sequential & In...