GC3817

Reed Switch - Compact - Normally Open Contacts Part Number : GC3817 Product Data Sheet PICTURE DIMENSIONS 3.80Ø (0.1496) 24.5 (0.965) 55 (2.165) 0.8Ø (0.0315) Drawings not to scale All dimensions in mm (inches) nominal. SPECIFICATION Contact Form Contact Material Switching Capacity Switching Voltage Switching Current Carrying Current Dielectric Strength Contact Resistance Insulation Resistance Pull - In - Sensitivity Drop - Out - Sensitivity Bounce Time Release Time Resonant Frequency Operating Frequency Vibration (10-1000Hz) Shock (11 ms) Capacitance Operating Temperature Range Test Coil Normally Open Rhodium 60 VA 400 VAC/DC 3.0 A 4.0 A 1000 VDC 80 mOhms 11 10 30 - 70 AT 15 0.5 ms 0.10 ms 2400 Hz 200 Hz 35 g 50 0.5 pF -40°C + 125°C 1800 Max. Max. Max. Max. Min. Max. Min. Min. Max. Max. Typ. Max. Typ. Type NOTE When cutting or bending switch leads it is important that the glass seal is not damaged. The cutting or bending point should be no closer than 3mm (.118in.) to the glass to metal seal and the lead should be supported between the cutting or bending point and the glass to metal seal. We offer a crop and form service for Reed Switches to be customized to your specification. Ordering Information PART NUMBER Type Minimum (AT) Sensitivity Maximum (AT) Sensitivity Example: Type 3817 Standard Sensitivity. Pull-in sensitivity between 30-70 AT is PART NO: 3817 30 70 Available in ranges of 5 AT e.g: 30-35, 35-40 etc. 3817 30 70 Did you know we also sell? www.DataSheet...