ST8016

ST8016 160 Output LCD Common/ Segment Driver IC Datasheet Version 2.0 2008/05/07 Note: Sitronix Technology Corp. reserves the right to change the contents in this document without prior notice. This is not a final specification. Some parameters are subject to change. www.DataSheet4U.com ST8016 1 FEATURES n n n n n Number of LCD drive outputs: 160 Supply voltage for LCD drive: +15.0 to +30.0 V Supply voltage for the logic system: +2.5 to +5.5 V Low power consumption Low output impedance (Segment mode) n Shift clock frequency - 20 MHz (MAX.): VDD = +5.0 ± 0.5 V - 12 MHz (MAX.): VDD = +3.0 to + 4.5 V - 8 MHz (MAX.): VDD = +2.5 to + 3.0 V n Adopts a data bus system n 4-bit/8-bit parallel input modes are selectable with a mode (MD) pin n Automatic transfer function of an enable signal n Automatic counting function which, in the chip selection mode, causes the internal clock to be stopped by automatically counting 160 bits of input data n Line latch circuits are reset when /DISPOFF active (Common mode) n Shift clock frequency: 4 MHz (MAX.) n Built-in 160-bit bi-directional shift register (divisible into 80 bits x 2) n Available in a single mode (160-bit shift register) or in a dual mode (80-bit shift register x 2) - Y1->Y160 Single mode - Y160->Y1 Single mode - Y1->Y80, Y81->Y160 Dual mode - Y160->Y81, Y80->Y1 Dual mode The above 4 shift directions are pin-selectable n Shift register circuits are reset when /DISPOFF active 2 DESCRIPTION The ST8016 is a 160-output segment/...