PCSLF1265

RoHS PCSLF1265 Power Chip Shielded Inductors Dimensions: Inches (mm) Features Shielded SMD Power Inductor Suitable for high current applications Low Profile Low Power loss and High current Allied Part Number Inductance (uH) Tolerance (%) Test Freq. KHz,0.5v DCR (Ω) ±20% IDC (A) Itemp (A) Max. PCSLF1265-2R0T-RC PCSLF1265-4R2T-RC PCSLF1265-7R0T-RC PCSLF1265-100T-RC PCSLF1265-150M-RC 2.0 4.2 7.0 10 15 30 30 30 30 20 1 1 1 1 1 .012 .015 .018 .020 .024 10 7.3 5.7 5.0 4.2 3.5 6.2 5.5 5.0 4.8 4.4 3.8 Electrical Inductance Range: 2µH to 220µH Tolerance: 30% up to 7.0µh, 20% from 10µh and above, tighter tolerances available Operating Temp: -40ºC ~ +85ºC IDC: Current at which inductance drops by 10% of intial value Itemp current: Value obtained when current flows and the temperature has risen by 40ºC PCSLF1265-220M-RC 22 20 1 .032 PCSLF1265-330M-RC PCSLF1265-470M-RC PCSLF1265-680M-RC 33 47 68 20 20 20 1 1 1 .041 .058 .079 2.8 2.4 2.0 3.4 2.8 2.4 Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Test Equipment PCSLF1265-101M-RC PCSLF1265-221M-RC (L): HP 4192A (RDC): Chen Hwa 502BC (IDC): HP4284A + HP42841A / Chen Hwa 1061 + 301A Physical 100 220 20 20 1 1 .123 .273 1.6 1.0 1.9 1.2 All specifications subject to change without notice. www.DataSheet4U.com Packaging: 500 pieces per 13 inch reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS IN...