ST
Sitronix
1. INTRODUCTION
ST7636
65K Color Dot Matrix LCD Controller/Driver
The ST7636 is a driver & controller LSI...
ST
Sitronix
1. INTRODUCTION
ST7636
65K Color Dot Matrix LCD Controller/Driver
The ST7636 is a driver & controller LSI for 65K color graphic dot-matrix liquid crystal display systems. It generates 396 Segment and 132 Common driver circuits. This chip is connected directly to a microprocessor, accepts Serial Peripheral Interface (SPI) or 8-bit/16-bit parallel display data and stores in an on-chip display data RAM. It performs display data RAM read/write operation with no external operating clock to minimize power consumption. In addition, because it contains power supply circuits necessary to drive liquid crystal, it is possible to make a display system with the fewest components.
2. FEATURES
Driver Output Circuits
♦ 396 segment outputs / 132 common outputs
On-chip Low Power Analog Circuit
♦ On-chip oscillator circuit ♦ Voltage converter (x2, x3, x4, x5, x6, x7, x8) ♦ Voltage
regulator ♦ On-chip electronic contrast control function (406 steps) ♦ Voltage follower (LCD bias: 1/5 to 1/12)
Applicable Duty Ratios
♦ Various partial display ♦ Partial window moving & data scrolling
Gray-Scale Display
♦ 4FRC & 31 PWM function circuit to display ♦ 64 gray-scale display.
Operating Voltage Range
♦ Supply voltage (VDD, VDD1): 2.4 to 3.3V (VDD2, VDD3, VDD4, VDD5): 2.4 to 3.3V ♦ LCD driving voltage (VOP = V0 - VSS): 3.76 to 18.0 V ♦ the suggested value of V0 is 12~15 V under bias =1/11.
On-chip Display Data RAM
♦ Capacity: 132 · 132 · 16 =278,784bits ♦ 65K colors (RGB)=(565) mode ♦ D...