ST7565P

ST Sitronix FEATURES Directly display RAM data through Display Data RAM RAM capacity : 65 x 132 = 8580 bits Display duty selectable by select pin 1/65 duty : 65 common x 132 segment 1/49 duty : 49 common x 132 segment 1/33 duty : 33 common x 132 segment 1/55 duty : 55 common x 132 segment 1/53 duty : 53 common x 132 segment High-speed 8-bit MPU interface: ST7565P can be connected directly to both the 80x86 series MPUs and the 6800 series MPUs. Serial interface (SPI-4) is also supported. Abundant command functions: Display data read/write, display ON/OFF, Normal/ Reverse display mode, page address set, display start line set, column address set, status read, display all points ON, LCD bias set, electronic volume, read-modify-write, set segment driver direction, power save mode, set common output direction, set V0 regulator internal resistor ratio. Built-in low power consumption power circuits: Booster, Regulator and Follower. ST7565P 65 x 132 Dot Matrix LCD Controller/Driver Booster circuit supports 2X/3X/4X/5X/6X boost level. External reference voltage (VDD2) for booster circuits. High-accuracy Regulator with contrast control (EV) and built-in V0 voltage regulator resistors. (Thermal gradient = –0.05%/° C) Built-in Follower for LCD bias voltages. Embedded R-C oscillation circuit. Support external clock input. Extremely low power consumption: 60uA (operating, bare chip with internal power) ( VDD–VSS = VDD2–VSS = 3V, Booster x4, V0 = 11V ). Condition: display pattern is “OFF”...