Power Chip Inductors
RoHS
PCI40
0.300 (7.62)
Power Chip Inductors
Dimensions: Inches (mm)
0.510 Max (12.95)
1st
0.370 (9.40) Max 0.100 (2...
Description
RoHS
PCI40
0.300 (7.62)
Power Chip Inductors
Dimensions: Inches (mm)
0.510 Max (12.95)
1st
0.370 (9.40) Max 0.100 (2.54)
0.205 Max (5.21)
2nd 3rd
0.110 (2.79)
0.100 (2.54)
0.118 (3.00)
0.290 (7.37) * Notice of marking change see “Marking” below.
Features Compact and Low Profile High energy storage and low DCR Designed with high heat resistant materials for reflow operation Wrap around terminals for excellent solder quality and inspection Flat top for pick and place assembly Non standard values available
Allied Part Number
Inductance (µh)
Tolerance (%)
SRF (MHz) TYP
DCR Max. Ω)
I sat (A )
I rms (A )
PCI40-1R0M-RC PCI40-1R5M-RC PCI40-2R2M-RC PCI40-3R3M-RC PCI40-4R7M-RC PCI40-6R8M-RC PCI40-100M-RC PCI40-150M-RC PCI40-220M-RC PCI40-330M-RC PCI40-470M-RC PCI40-680M-RC PCI40-101M-RC PCI40-151M-RC PCI40-221M-RC
1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
100 90 80 65 45 38 30 27 19 15 12 10 9.0 6.0 5.0 4.5 3.5 2.5 2.0
.009 .010 .012 .015 .018 .027 .038 .046 .085 0.10 0.14 0.20 0.28 0.40 0.61 1.02 1.27 2.02 3.00
9.0 8.0 7.0 6.4 5.4 4.6 3.8 3.0 2.6 2.0 1.6 1.4 1.2 1.0 0.8 0.6 0.5 0.4 0.3
6.8 6.4 6.1 5.4 4.8 4.4 3.9 3.1 2.7 2.1 1.8 1.5 1.3 1.0 0.8 0.6 0.5 0.4 0.3
Electrical Inductance Range: 1.0µh to 1000µh. Tolerance: ± 20% over the entire inductance range. Test Frequency: Inductance measured at 100KHz, 0.1 Vrms. After soldering, push Operating Temp. Range: i-40° to...
Similar Datasheet