PCHC1354S

RoHS Power Choke High Current Inches (mm) PCHC1354S Dimensions: Allied Part Number Inductance (µ h) Tolerance (%) Test Freq. KHz,1v DCR (Ω) Max Isat (A) Irms (A) Max. Features Magnetically shielded construction High saturation current up to 38.8A Expanding operating temp range Low DCR resistance Suitable for pick and place Electrical Inductance Range: .68µH to 6.8µH Additional values available Tolerance: 20% over entire range, Available in tighter tolerances Test Frequency: 100KHz, 1.0Vdc Operating Temp: -55ºC ~ +125ºC Storage Temp: -55ºC ~ +125ºC Temp rise: ∆ T=40ºC Typical at rated Irms with out core loss. Part temperature should not exceed 125ºC including temperature rise. Inductance drop: 20% typical at rated Isat Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Immersion Time: 10 sec. ± 1 sec. Test Equipment (L): HP 4284A LCR meter or equivalent (DCR): CH16502, Agilent 33420A Micro-Ohm meter PCHC1354S-R68M-RC PCHC1354S-1R0M-RC PCHC1354S-1R4M-RC PCHC1354S-2R2M-RC PCHC1354S-3R3M-RC PCHC1354S-4R7M-RC PCHC1354S-6R8M-RC 0.68 1.00 1.40 2.20 3.30 4.70 6.80 20 20 20 20 20 20 20 100 100 100 100 100 100 100 1.5 2 3.4 4.5 7 8.8 12 38.8 34 26 20 18 15 12 29.7 26 22 18 15 13 9 All specifications subject to change without notice. Land Pattern www.DataSheet4U.com Schematic (IDC): 3260B WK & DC Bias 3265B WK Physical Packaging: 500 pieces per 13 inch reel. Marking: EIA Inductance Code 714...