MIL-STD-1553 DATA BUS
Make sure the next
Card you purchase
• Requires only +5V Power Supply
• Small Size - 64 Pin QFP
• Low Power
• Dual Transceiver
• HARRIS I/O Compatibility
• Conforms fully to MIL-STD-1553A,
-1553B, and -1760
The BU-63152 transceiver is a complete dual transmitter and receiv-
er pair conforming fully to MIL-STD-1553A, 1553B, and 1760.
Features include: +5V power supply voltage, Harris interface type,
completely independent dual redundant operation, and small size 64-
pin Quad Flat Package (QFP).
The receiver section of the BU-63152 series accepts phase-modulat-
ed bipolar data from a MIL-STD-1553 Data Bus and produces TTL
level signals at its outputs: RX DATA OUT and RX DATA OUT.
These outputs represent positive and negative variations of the input
data signals beyond an internally fixed threshold level. An external
STROBE input enables or disables the receiver’s outputs.
The transmitter section accepts bipolar TTL signal data at its
TX DATA IN and TX DATA IN inputs and produces phase-modulated
bipolar data at the TX DATA OUT and TX DATA OUT outputs. When
used with the recommended transformers, the transmitter typically
produces 21Vp-p for transformer coupled outputs and 7.2Vp-p at the
bus. An external input, INHIBIT, takes priority over the transmitter
inputs and disables the transmitter when activated with a logic “1”.
The small size, +5V power supply voltage, and compliance with MIL-
STD-1553A, 1553B, and 1760 simplify engineering design, making it
an excellent choice for interfacing with any MIL-STD-1553 system.
Data Device Corporation
105 Wilbur Place
Bohemia, New York 11716
631-567-5600 Fax: 631-567-7358
FOR MORE INFORMATION CONTACT:
1-800-DDC-5757 ext. 7234
© 2000 Data Device Corporation