QB210T
INC.
QBAR ® NORMALLY-CLOSED SWITCH
DESCRIPTION
QBAR® ICs provide a 3-terminal semiconductor switch that functio...
QB210T
INC.
QBAR ® NORMALLY-CLOSED SWITCH
DESCRIPTION
QBAR® ICs provide a 3-terminal semiconductor switch that functions as: a solid-state normally-closed switch a non-inverting digital
transistor a solid-state replacement for a normally-closed, non-isolating relay. QBAR® ICs do not require a separate power supply lead. This makes possible: simplified control wiring replacement of normally-closed D.C. relays with highly reliable solid-state devices improved fail-safe performance in the event of lost control power, severed or shorted control wires. 3 AMPERES 20 VOLTS TO-220 package PIN
1 2 3 4 INPUT GND OUTPUT GND 3 2 1
4
QBAR SWITCH SYMBOL
FUNCTIONAL SCHEMATIC
OUTPUT
FUNCTION TABLE INPUT HI SWITCH STATE
(OUTPUT-TO-GND)
OUTPUT INPUT
OFF ON ON
GND
INPUT (CMOS or TTL)
LO OPEN
TYPICAL APPLICATIONS
ALARM SWITCH
+20V Warning indicator, cooling fan, brake actuator
PROTECTION OF FRAGILE OR TRIGGER DEVICES
+12V
POWER SUPPLY EFFICIENCY BOOST
+5V
REGULATOR
+5V
REGULATOR
I to other logic
Vout DC Power Supply (up to 20V) + Cout Logic Bleeder Resistor
LOGIC
Status Normally HI
Status Inputs, normally high
Status Normally HI
www.DataSheet4U.com A QBAR switch activates an alarm over a large range of system failure conditions: system failure indicated by a LO on the status output status conductor cut status conductor shorted to ground loss of +5V supply Any of these conditions will cause the QBAR switch to turn ON and power the alarm.
A QBAR switch p...