HIGH CURRENT MOLDED POWER INDUCTORS
HIGH CURRENT MOLDED POWER INDUCTORS
L810HW SERIES
1. PART NO. EXPRESSION :
L810HW-1R0MF
(a) (b) (c) (d)(e)
(a) Serie...
Description
HIGH CURRENT MOLDED POWER INDUCTORS
L810HW SERIES
1. PART NO. EXPRESSION :
L810HW-1R0MF
(a) (b) (c) (d)(e)
(a) Series code (b) Type code (c) Inductance code : 1R0 = 1.0uH
(d) Tolerance code : M = ±20% (e) F : Lead Free
2. CONFIGURATION & DIMENSIONS :
A' A
C' C D L G
SWORLD R47
B
B'
E
PCB Pattern Unit:m/m A' 13.9 Max. A 12.7±0.3 B' 13.5 Max. B 12.7±0.3 C' 3.7 Max. C 3.5 Max. D 2.5±0.5 E 3.0±0.5 G 7.0 Ref. H 4.5 Ref. L 15.0 Ref.
3. SCHEMATIC :
4. MATERIALS : a b (a) Core (b) Wire (c) Terminal
c
5. FEATURES : a) Shielded Construction b) Frequency up to 5MHz
www.DataSheet4U.com
NOTE : Specifications subject to change without notice. Please check our website for latest information.
H
11.11.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 1
HIGH CURRENT MOLDED POWER INDUCTORS
L810HW SERIES
6. GENERAL SPECIFICATION : a) Test Freq. : Q : 100KHz/1.0VDC b) Ambient Temp. : 20°C c) Operating Temp. : -55°C to +125°C d) Storage Temp. : -55°C to +125°C e) Humidity Range : 50 ~ 60% RH f) Heat Rated Current (Irms) : Will cause the coil temp. rise approximately ǻT=40°C without core loss. g) Saturation Current (Isat) : Will cause L 0 to drop approximately 20% typ. h) Part Temperature (Ambient+Temp. Rise) : Should not exceed 125°C under worst case operating conditions.
7. ELECTRICAL CHARACTERISTICS : Part No. L810HW-R47MF L810HW-R68MF L810HW-R82MF L810HW-1R0MF L810HW-1R5MF L810HW-2R2MF L810HW-3R3MF L810HW-4R7MF L810HW-6R8MF L810HW-100MF Inductance L 0 ( µH ) ±20% @ 0 Adc 0.4...
Similar Datasheet