1.8 V Dual Analog-to-Digital Converter
Data Sheet
FEATURES
Single 1.8 V supply operation SNR: 49.3 dBFS at 200 MHz input at 500 MSPS SFDR: 65 dBc at 200 MHz in...
Description
Data Sheet
FEATURES
Single 1.8 V supply operation SNR: 49.3 dBFS at 200 MHz input at 500 MSPS SFDR: 65 dBc at 200 MHz input at 500 MSPS Low power: 315 mW at 500 MSPS On-chip interleaved clocking On-chip reference and track-and-hold 1.2 V p-p analog input range for each channel Differential input with 500 MHz bandwidth LVDS-compliant digital output On-chip voltage reference and sample-and-hold circuit DNL: ±0.2 LSB Serial port control options
Interleaved clock timing adjustment Offset binary, Gray code, or twos complement data format Optional clock duty cycle stabilizer Built-in selectable digital test pattern generation Pin-programmable power-down function Available in 48-lead LFCSP
APPLICATIONS
Battery-powered instruments Handheld scope meters Low cost digital oscilloscopes OTS: video over fiber
8-Bit, 500 MSPS, 1.8 V Analog-to-Digital Converter (ADC)
AD9286
GENERAL DESCRIPTION
The AD9286 is an 8-bit, monolithic sampling, analog-to-digital converter (ADC) that supports interleaved operation and is optimized for low cost, low power, and ease of use. Each ADC operates at up to a 250 MSPS conversion rate with outstanding dynamic performance.
The AD9286 takes a single sample clock and, with an on-chip clock divider, time interleaves the two ADC cores (each running at one-half the clock frequency) to achieve the rated 500 MSPS. By using the SPI, the user can accurately adjust the timing of the sampling edge per ADC to minimize the image spur energy.
The ADC requires a single 1.8...
Similar Datasheet