JRC2351

J & K Series Thru Hole LEDs J Series, Blue Clear and Diffused, Water Clear LED, 2351 Series Small Flange T-1, 3mm Round The J series lamps are made with AlInGaP chips which can be used for standard brightness at low current (2mA) or super brightness at standard current (20mA). This package is compatible with our extensive line of T 1 indicators. The Blue LEDs are made with GaN/SiC (428nM) and InGaN/SiC (468nM) chips. Blue should only be used when this colors are necessary for the application and higher cost is acceptable. Anode 3.0±.2 3.15 4.5±.3 1.0±.2 26.4 min 2351 Series 1.0 min 2.54 0.5 typ GENERAL INFORMATION Operating Temperature Range Storage Temperature Range Reflow Soldering Temperature -30 °C to +85 °C -55 °C to +100 °C 260 °C for 5 sec max APPLICATION INFORMATION (ALL RATINGS AT 25 °C AMBIENT) Peak Part No. Emitted Color Absolute Maximum Ratings E/O Characteristics Vr (V) 5 5 5 5 5 5 5 5 5 2mA 6 3 7 7 5 7 Iv (mcd) @If=20mA Min 40 40 50 50 40 50 63 150 8 Typ 110 50 130 130 80 130 100 300 12 Vf (V) @ If=20mA Min 2.0 2.0 2.0 2.0 2.0 2.0 3.8 3.5 3.8 Typ 2.4 2.4 2.4 2.4 2.4 2.4 4.5 4.0 4.5 λ (nM) ∆λ (nM) 20 20 15 18 20 17 65 26 65 Pd (mW) 60 60 60 60 60 60 140 120 140 If (mA) dc 25 25 25 25 25 25 25 25 25 1/10 duty @ 1 khz Ir @Vr=5V 2Θ1/2 (Deg) 40 40 40 40 40 40 40 40 60 (µA) 10 10 10 10 10 10 50 50 10 JRC2351 JGC2351 JYC2351 JOC2351 JEC2351 JYOC2351 IUBC2351 IUBC2351-7 IUBD2351 Red Green Yellow Orange Red YelOrng Blue Blue BlueDiff 632 575 591 621 639 611 ...