Document
Intelligent Power Devices (IPDs)
MIP516
Silicon MOSFET type integrated circuit
■ Features
• Built-in five protection functions. (over-current, over-voltage, loadshort-circuit, over heat, ESD) • Driving directly from CMOS (microcomputer) is possible. • It is exchangeable easily from a bipolar transistor and MOSFET • The miniaturized package equipped with three terminals was adapted.
2.90+0.20 –0.05 1.9±0.1 0.95 0.95 4 5 6
Unit : mm
0.16+0.10 –0.06
1.50+0.25 –0.05
2.8+0.2 –0.3
3
2
1
0.30+0.10 –0.05 0.50+0.10 –0.05 10°
• Lamp-Solenoid, driver • Motor driver
1.1+0.2 –0.1
0.65±0.15
■ Applications
1.1+0.3 –0.1
■ Absolute Maximum Ratings TC = 25°C ± 3°C
Parameter Drain-source voltage Output current Input voltage Input current Drain clamp energy endurance *1 Power dissipation 1 *2 Power dissipation 2
*3
VDS IO VIN IIN ECLP PD1 PD2 Topr Tch Tstg
− 0.5 to +45 1.0 − 0.5 to +6.0 ±2 13 0.2 0.8 −40 to +85 150 −55 to +150
V A V mA mJ W W °C °C °C
Marking Symbol: MB
Operating ambient temperature Channel temperature Storage temperature
Note) *1: L = 10 mH, IL = 1.61 A, VDD = 20 V, 1 pulse, TC = 25°C *2: Single unit *3: Mounting on the PCB (40 mm2, thickness 1.7mm glass epoxy substrate) (Ta = 25°C)
■ Block Diagram
Drain
Over-current protection
Load short-circuit protection
www.DataSheet4U.com
In
Gate cutoff circuit
ESD protection
Over-heat protection
Over-voltage protection
Source
Publication date: August 2003 SLB00059AED
0 to 0.1
Symbol
Rating
Unit
1 : Drain 2 : Drain 3 : Source 4 : In 5 : Drain 6 : Drain Mini6-G1 Package
0.4±0.2
5°
1
MIP516
■ Electrical Characteristics TC = 25°C ± 3°C
Parameter Drain-source ON resistance Drain-source voltage Drain clamp voltage Drain-source cutoff current 1 Drain-source cutoff current 2 Drain-source cutoff current 3 Input voltage high-level Input voltage low-level Input current (normal) Input current (act on protection) * Over current protection limit Short circuit load protection limit Input voltage of act on protection Symbol RDS(on) VDS(on) VDS(CLP) IDS(off)1 IDS(off)2 IDS(off)3 VIN(H) VIN(L) IIN(on) IIN(PROT) IOCP VDS(SHT) VIN(PROT) Conditions VIN = 5 V, IDS = 1 A VIN = 5 V, IDS = 1 A VIN = 0 V, IDS = 3 mA VIN = 0 V, VDS = 12 V VIN = 0 V, VDS = 25 V VIN = 0 V, VDS = 40 V IDS = 0.5 A IDS = 1 mA VIN = 5 V, VDS = 0 V VIN = 5 V VIN = 5 V VIN = 5 V 1.1 1.0 4.0 0.3 0.75 1.7 1.6 6.0 4 0.80 0.5 1.10 45 Min Typ 0.70 0.70 52 0.01 0.02 0.08 5.00 8.00 10.00 V V mA mA A V V Max 0.90 0.90 Unit Ω V V µA
Note) 1. At on-state when drain voltage exceeds the "Short circuit load protection voltage", output current begin to oscillate. 2. When drain voltage exceeds the "drain clamp voltage" output MOS turn on, so drain voltage are clamped before the drain-source junction become breakdown 3. *: State of short circuit laod protection and over heat protection (designed guarantee).
www.DataSheet4U.com
2
SLB00059AED
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radi.