DatasheetsPDF.com

PWB2412D-1W5 Dataheets PDF



Part Number PWB2412D-1W5
Manufacturers MORNSUN
Logo MORNSUN
Description DUAL/SINGLE OUTPUT DIP DC-DC CONVERTER
Datasheet PWB2412D-1W5 DatasheetPWB2412D-1W5 Datasheet (PDF)

PWA_(M)D-1W5&PWB_(M)D-1W5 Series 1.5W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT DIP DC-DC CONVERTER multi-country patent protection RoHS FEATURES Wide input voltage(4:1) Operating Temperature: -40°C to +85°C 1500VDC Input/Output Isolation Short Circuit Protection(automatic recovery) Internal SMD construction No external component required No Heat Sink Required Industry Standard Pinout Five-sided shielding package(PWA/B_MD) MTBF>1,000,000 hours RoHS Compliance PRODUCT PROGRAM Input Pa.

  PWB2412D-1W5   PWB2412D-1W5


Document
PWA_(M)D-1W5&PWB_(M)D-1W5 Series 1.5W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT DIP DC-DC CONVERTER multi-country patent protection RoHS FEATURES Wide input voltage(4:1) Operating Temperature: -40°C to +85°C 1500VDC Input/Output Isolation Short Circuit Protection(automatic recovery) Internal SMD construction No external component required No Heat Sink Required Industry Standard Pinout Five-sided shielding package(PWA/B_MD) MTBF>1,000,000 hours RoHS Compliance PRODUCT PROGRAM Input Part Number PWA2405(M)D-1W5 PWA2412(M)D-1W5 PWA2415(M)D-1W5 PWB2403(M)D-1W5 PWB2405(M)D-1W5 PWB2409(M)D-1W5 PWB2412(M)D-1W5 PWB2415(M)D-1W5 24 9.0-36 40 16 Voltage (VDC) Nominal Range No-load Voltage Max* (mA)(typ) (VDC) ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 48 18-72 80 8 3.3 5 9 12 15 Output Current (mA) Max ±150 ±63 ±50 500 300 167 125 100 ±150 ±63 ±50 500 300 167 125 100 Min ±15 ±6 ±5 50 30 17 12 10 ±15 ±6 ±5 50 30 17 12 10 74 78 79 72 74 76 78 80 74 78 80 72 74 76 78 80 Efficiency (%,typ.) APPLICATIONS The PWA_(M)D-1W5&PWB_(M)D-1W5 Series are specially designed for applications where a wide range input voltage power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is wide range (voltage range≤ 4:1); 2) Where isolation is necessary between input and output (Isolation Voltage≤ 1500VDC); 3) Where the regulation of the output voltage and the output ripple noise are demanded. PWA4805(M)D-1W5 PWA4812(M)D-1W5 PWA4815(M)D-1W5 PWB4803(M)D-1W5 PWB4805(M)D-1W5 PWB4809(M)D-1W5 PWB4812(M)D-1W5 PWB4815(M)D-1W5 * Input voltage over it may cause permanent damage to the device. Note: The load shouldn't be less than 10%, otherwise ripple will increase dramatically. Operation under 10% load will not damage the converter; However, they may not meet all specification listed. MODEL SELECTION OUTPUT SPECIFICATIONS Item Test Conditions See below products program Refer to recommended circuit Min 0.15 ±1 ±3 ±0.5 ±0.2 Typ Max 1.5 ±3 ±5 ±2* ±0.75 ±0.03 20 50 300 50 100 KHz %/°C mVp-p % Units W PWA2412D-1W5 Rated Power Package Style Output Voltage Input Voltage Produ ct Se rie s Output Power Positive Voltage accuracy Negative Voltage accuracy Refer to recommended circuit Load Regulation Line Regulation Temperature Drift Ripple** From 10% to 100% load Input voltage from low to high Refer to recommended circuit 20MHz bandwidth 20MHz bandwidth 100% load, nominal input voltage MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax: 86-20-38601272 Http://www.mornsun-power.com Noise** Switching Frequency * Dual output models unbalanced load: ±5%. **Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power Converter section, application notes. Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. See below recommended circuits for more details. MORNSUN reserves the copyright Specifications subject to change without notice PWA_(M)D-1W5 & PWB_(M)D-1W5 A/0-2008 Page 1 of 2 COMMON SPECIFICATION Item Storage humidity Operating temperature Storage Temperature Temp. rise at full load Lead temperature Isolation voltage Isolation resistance Isolation capacitance Cooling Case material Short circuit protection MTBF Weight Free air convection D: Plastic(UL94-V0); MD: Steel, nickel plated 1.5mm from case for 10 seconds Tested for 1 minute and 1mA max Test at 500VDC 1500 1000 100 -40 -55 15 300 VDC MΩ PF Test Conditions Min Typ Max 95 85 125 °C Units % Recommended Circuit All the PWA_(M)D-1W5 & PWB_(M)D-1W5 Series have been tested according to the following recommended testing circuit before leaving factory. (See Figure 1). Vin Cin +Vout DC DC 0V -Vout G ND Single output Vin Cin +Vout DC DC 0V G ND Continuous, automatic recovery 100 15 K hours g (Figure 1) If you want to further decrease the input/output ripple, you can increase capacitance properly or choose capacitors with low ESR. However, the capacitance should not be too high, or may cause start-up problem. For every channel of output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter Safe Operating Area TYPICAL CHARECTERISTICS Temperature Derating Graph capacitor sees (Table 1).If you want to use the products in high EMI, please choose our metal packaged products (PWA_MD-1W5 & PWB_MD1W5). General: Cin: 24V&48V 10μF-47μF Operating Temp.( C ) Cout: 10μF/100mA Output External Capacitor Table (Table 1) Single Vout Cout Cout Daul Vout (uF) (VDC) (uF) (VDC) 3.3 2200 ±5 680 5 9 12 15 1000 680 470 330 ±12 ±15 --330 220 --- OUTLINE DIMENSIONS & FOOTPRINT DETAILS 31.80 (1.252) (0.094) First Angle Projection RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) Dual Output /Sin.


PWB2409D-1W5 PWB2412D-1W5 PWB2415D-1W5


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)