TO519

Clipped Sine SM TCXO Temperature Compensated Crystal Oscillator Excellent frequency stability Miniature size, reflow soldering available Clipped sine output, tight specifications and an internal trimmer Suited for communications equipment, cellular radios, and instrumentation. TO519 Specifications: Frequency Range: Operating Temperature: 10.000 MHz ~ 26.0000 MHz 0°C ~ +50°C -10°C ~ +60°C -20°C ~ +70°C -30°C ~ +75°C -40°C ~ +85°C Storage Temperature: Frequency Stability: Vs. Temperature: ± 5.0 ppm ± 3.0 ppm ± 2.5 ppm Vs. Input Voltage: Vs. Load: Aging: Pulling Range: Vss+0.5V ~ Vcc –0.5V: 5 ~ 16 ppm/V (optional) Control Slope: Start-Up Time: Output Waveform: Positive 8 ms max Clipped Sine/10KΩ//10pF CMOS/15pF/50±5% Output Voltage: Phase Noise: 0.8 Vp-p min. -110 dBc/Hz (offset 100Hz) -130 dBc/Hz (offset 1KHz) -140 dBc/Hz (offset 10KHz) Supply Voltage: +3.3 VDC (± 0.2%) +5.0 VDC (± 0.3%) Supply Current: Note: Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. www.DataSheet4U.com 2. Not all combinations of the above, stabilities, and temperature ranges are available. Consult VTC Support if your requirement is not standard. All specifications subject to change without notice. 1. TO-I -A -B -C -D -L -40°C ~ +85°C ± 0.2 ppm at voltage ± 5% ± 0.2 ppm at load ± 10% ± 1.0 ppm max first year -S -C Pin #1 #4 #5 #8 Configurations VC or NC Ground Output Supply VDD -P All dimensions are in mm 2.0 mA...