80W AC-DC Open Frame Power-Supply
MPI-8080
Industrial Power Supply
80W AC-DC Open Frame Power Supply Output 100W with Fan Required
E N L
1
TB1
TRANSFO...
Description
MPI-8080
Industrial Power Supply
80W AC-DC Open Frame Power Supply Output 100W with Fan Required
E N L
1
TB1
TRANSFORMER
12 TB2
15.24 14.44
0.4
AC-DC
6.85
1.4
0.765
3.3 3.8 3.97
Measuring the screw protrusion first:
2.5 screw System chassis Use #6-32 screw Protrusion limits 2.5mm x4
Features
*Input Voltage: 85~264VAC *Input Frequency: 47~63Hz *Input Current: 3A at 115VAC or 1.5A at 230VAC max. capacitors *Inrush Current: Does not exceed 30A at 115VAC input or 60A at 230VAC input, cold start at 25oC *Load Regulation: With +5V output set between 4.95~5.05V and all output at 60% rated load, and all other outputs in the accuracy range, max. load can not > 80W convection cooling and > 100W forced air cooling *Ripple And Noise: Peak to peak ripple and noise for each output is < 1% of each output voltage at rated load *Line Regulation: < +/-1% at rated load with +/-10% change in input voltage *Load Regulation: < +/-1% for +5V, < +/-5% for other outputs with +/-40% change in measured output loading from 60% rated load and other outputs at 60% rated laod *Hold Up Time: > 16ms at 115VAC input and rated load *Efficiency: > 70% at nominal line and rated load *Altitude: 10,000 feet *Protection: Short Circuit: Hiccup mode against short circuit or over load conditions auto recovery to normal after wrong conditions are removed Output: Built-in crowbar circuit shuts down outputs to avoid damage. Trip point of over voltage protection is between 5.7~7.0V AC line ON/OFF restarts and...
Similar Datasheet