Low Capacitance TVS Diode Array
PJDLLLC05
Low Capacitance TVS Diode Array
This diode array is configured to protect up to two high speed data transmissi...
Description
PJDLLLC05
Low Capacitance TVS Diode Array
This diode array is configured to protect up to two high speed data transmission lines, used in Low Voltage Differential Signal (LVDS) ports. Acting as a line terminator, minimizes overshoot and undershoot conditions due to bus impedance, as well as protect against over-voltage events as electrostatic discharges. The line-line concept minimizes the problems to customers to re-route PCB lines, simplifying the design.
SOT563 Package
6 5
4
1
2
SPECIFICATION FEATURES
Maximum Capacitance of 1.2pF at 0Vdc 1MHz Line-to-Ground Maximum Leakage Current of 1.0µA @ VRWM Industry Standard SMT Package SOT563 IEC61000-4-2 Full Compliance; 15kV Air, 8kV Contact* 100% Tin Matte finish (LEAD-FREE PRODUCT)
6
3
Line1
Gnd
5
Line2
4
APPLICATIONS
USB 2.0 and Firewire Port Protection HDMI Version 1.3 DVI
1
2
3
Line1 Gnd Line2
Note: pins 1and 6 (Line1), pins 3 and 4 ( Line2) and pins 2 and 5 (Gnd) must be connected externally, as the drawing attached below.
MARKING : 05
I/O Data line + Ground I/O Data line -
1
6
2
5
3
4
Line-line concept ease the PCB design, directly placing the device over the data lines, opening only the contact points. VREF is fixed by the operating voltage, referenced to the ground.
MAXIMUM RATINGS Tj = 25°C Unless otherwise noted
Rating Peak Pulse Power (8/20µs Waveform)
www.DataSheet4U.com
Symbol P PPM I PP TJ Tstg TL
Value 50 6 -55 to +125 -55 to +150 260
Units W A °C °C °C
Peak Pulse Current (8/20µs Wavefor...
Similar Datasheet