Custom Clock Generator
PCS3P7100A Custom Clock Generator for Display Systems
www.DataSheet4U.com
Features
• Custom Clock Generator for Display...
Description
PCS3P7100A Custom Clock Generator for Display Systems
www.DataSheet4U.com
Features
Custom Clock Generator for Display Systems Wide Operating Frequency Range covering most of the pixel frequencies Generates a low EMI 1x Output 4 Spread Deviation selection options Supply voltage : 3.3V ± 0.3V 2.5V ± 0.125V Frequency range: 3.3V: 20 MHz-130 MHz 2.5V: 30 MHz-130 MHz 6L-TSOT23 (6L- SOT26) package
frequencies. The device addresses the need of a low EMI clock generator for use in display systems covering wide choice of pixel frequencies. PCS3P7100A reduces electromagnetic interference (EMI) at the clock source, allowing system wide reduction of EMI of all clock dependent signals. PCS3P7100A allows significant system cost savings by reducing the number of circuit board layers, ferrite beads, shielding that are traditionally required to pass EMI regulations. The Supply Voltage of the Device is 3.3V/2.5V. It has two Spread Selection Pins, SS1% and SS2%. Refer to the Spread Deviation Selection Table for details.The Device is available in 6L-TSOT23 Package.
Product Description
PCS3P7100A is a versatile spread spectrum modulator designed specifically for a wide range of clock
Application
PCS3P7100A is targeted for use in Display Systems.
Block Diagram
VDD
SS1%
SS2%
CLKIN
PLL
ModOUT
VSS
©2010 SCILLC. All rights reserved. JANUARY 2010 – Rev. 1
Publication Order Number: PCS3P7100/D
PCS3P7100A
Pin Configuration (6L-TSOT23 Package)
www.DataSheet4U.com
CLKIN VSS M...
Similar Datasheet