AND262HBA

AND262HBA Ultra Bright LED Lamps: Type 3 Weight: 0.14g Unit: mm www.DataSheet4U.com AND262HBA GaN High Brightness Blue Light Emission 3 mm (T-1) Package Peak wavelength (λp = 430nm) high bright emission All plastic mold type, clear colorless lens Low drive current: 1 to 20 mA DC Excellent On-Off contrast ratio Fast response time, capable of pulse operation High power intensity High reliability RoHS Compliant Maximum Ratings (Ta = 25°C) Characteristics Forward Current Reverse Voltage Power Dissipation Operating Temperature Range Storage Temperature Range Symbol IF VR PD TOpr TSig Rating 30 5 120 -40 to 85 -40 to 100 Unit mA V mW C C Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Symbol VF IR IV λP ∆λ λd θ Test Condition IF = 20 mA VR = 5V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IV = 1/2 Peak Minimum – – 160 – – – – Typical 3.8 – 250 430 65 466 40 Maximum 4.5 50 – – – – – Unit V µA mcd nm nm nm degree Precaution Please be careful of the following: 1. Soldering temperature: 260 C max. Soldering time: 5 sec. max. Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. 3. Absolute secure counter measures against static electricity and surge shou...