LCD
GDM1602B
GDM1602B
Features
1. 2. 3. 4. 5. 6. 7. 5x8 dots Built-in controller (S6A0069or equivalent) +5V power supply (a...
Description
GDM1602B
GDM1602B
Features
1. 2. 3. 4. 5. 6. 7. 5x8 dots Built-in controller (S6A0069or equivalent) +5V power supply (also available for =3.0V) 1/16 duty cycle Easy interface with 4-bit or 8-bit MPU BKL to be driven by pin1, pin2, or pin15, pin16 or A, K 16x2 characters
SPECIFICATIONS OF LCD MODULE
Outline dimension
Absolute maximum ratings
Item Power voltage Input voltage Operating temperature range Storage temperature range *Wide temperature range is available Symbol VDD-VSS VIN Top Tst -0.3 -0.3 0 -10 Standard Unit 7.0 VDD+0.3 +50 +60 V ℃
(operating/storage temperature as –20~+70/-30~+80℃)
Ver:A
1
2006.12.6
www.DataSheet.in
GDM1602B
Block diagram
Interface pin description
Pin no.
1 2 3 4 5 6 7~10 11~14 15 16
Symbol VSS VDD V0
RS R/W E DB0~DB3 DB4~DB7 A(LED+) K(LED-)
External connection
Power supply MPU MPU MPU MPU MPU LED BKL power supply
Function
Signal ground for LCM (GND) Power supply for logic for LCM Contrast adjust Register select signal Read/write select signal Operation (data read/write) enable signal Four low order bi-directional three-state data bus lines. Used for data transfer between the MPU and the LCM. These four are not used during 4-bit operation. Four high order bi-directional three-state data bus lines. Used for data transfer between the MPU Power supply for BKL (Anode) Power supply for BKL (GND)
Contrast adjust
VDD~V0: LCD Driving voltage VR: 10k~20k
Ver:A 2 2006.12.6
www.DataSheet.in
GDM1602B
Optical characteristics
TN type display mo...
Similar Datasheet