Inductors
IMS-2SWWD-30
Vishay Dale
Inductors
Commercial, Subminiature, Molded, Shielded
FEATURES
• • • • • • Classification is Gr...
Description
IMS-2SWWD-30
Vishay Dale
Inductors
Commercial, Subminiature, Molded, Shielded
FEATURES
Classification is Grade 1, Class A Ultra-reliable molded shielded inductor RoHS Inductance range is 0.10 µH to 10 000 µH COMPLIANT 0.136" [3.45 mm] diameter by 0.335" [8.51 mm] length Molded epoxy envelope Subminiature size for high density circuits and high inductance-to-size ratio Utmost reliability, electrical performance and minimum coupling in high density packaging
ELECTRICAL SPECIFICATIONS
Inductance Tolerance: ± 10 % on Q-Meter at specified frequency Dielectric Strength: 700 VRMS at sea level Operating Temperature: - 55 °C to + 105 °C Self-Resonant Frequency: Measured per MIL-PRF-15305 Q: Measured on a Q-Meter at specified frequency Rating: Maximum based on 1/3 watt dissipation
DENSITY SPECIFICATIONS
Weight: 0.50 gram maximum Shielding: Less than 3 % coupling with two units mounted side by side at 1000 cycles
ENVIRONMENTAL SPECIFICATIONS
Moisture: Meets requirements of MIL-PRF-15305 Vibration: High frequency, 10 Hz to 2000 Hz at 20 g ± 10 % maximum for 12 logarithmic swings each of 20 minute duration repeated for each of three mutually perpendicular planes Shock: 100 g, 6 ms
MECHANICAL SPECIFICATIONS
Terminal Strength: Meets five pound pull test; three 360° rotations in alternate directions per MIL-PRF-15305 (latest revision)
DIMENSIONS in inches [millimeters]
1.438 ± 0.188 [36.52 ± 4.78] 0.145 [3.68] Max.
#24 0.020 ± 0.002 [0.508 ± 0.051] TCW
0.335 ± 0.010 [8....
Similar Datasheet