C8051T602

C8051T600/1/2/3/4/5/6 Mixed-Signal Byte-Programmable EPROM MCU Analog Peripherals High-Speed 8051 μC Core - 10-Bit ADC (‘T600/602/604 only) Up to 500 ksps Up to 8 external inputs VREF external pin, Internal Regulator or VDD Internal or external start of conversion source Built-in temperature sensor - Comparator Programmable hysteresis and response time Configurable as interrupt or reset source Low current On-Chip Debug - C8051F300 can be used as code development platform; complete development kit available - On-chip debug circuitry facilitates full speed, - Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks s - Up to 25 MIPS throughput with 25 MHz clock - Expanded interrupt handler n Memory - 256 or 128 Bytes internal data RAM ig - 8, 4, 2, or 1.5 kB byte-programmable EPROM code memory s Digital Peripherals e - Up to 8 Port I/O with high sink current capability - Hardware enhanced UART and SMBus™ serial D ports non-intrusive in-system debug - Provides breakpoints, single stepping, inspect/modify memory and registers w Supply Voltage 1.8 to 3.6 V - On-chip LDO for internal core supply e - Built-in voltage supply monitor Temperature Range: –40 to +85 °C N Package Options: - 3 x 3 mm QFN11 r - 2 x 2 mm QFN10 (C8051T606 Only) fo - MSOP10 (C8051T606 Only) Not Recommended - SOIC14 (C8051T600/1/2/3/4/5 Only) - Three general purpose 16-bit counter/timers - 16-bit programmable counter array (PCA) with three capture/compare m...