CB201209T-110Y-C3

THE FULL RANGE OF FERRITE BEADS LARGE ASSORTMENT OF FERRITE CLAMPS EMI SUPPRESSION DEVICES ALLPOWER SOURCE ATTENUATION OF CONDUCTED NOISE FLAT CABLE CLAMPS COMMON MODE BALUNS FERRITE BEADS D-SUBCONNECTOR NOISE SUPPRESSORS ALLPOWER DIVISION TECHNOLOGY DYNAMICS INC. 100 School Street, Bergenfield, NJ 07621 Phone: (201) 385-0500, Fax: (201) 385-0702 www.theallpower.com www.DataSheet.in ALLP WER SOURCE THE IRON POWDER CORES 1. Applications and Characteristics: If the design frequency is below 300KHz, the preferred choice of RF circuits for the iron powder core are: DC power supply chokes, motors, dimmer control filteres and other EMI/RFI circuits. 2. Temperature Effects: The iron powder core is well suited from -55°C to +125°C. Because the iron powder core does not have a low curie temperature it will function to several hundred degrees Celcius. However, continued operation above 200°C may result in a permanent shift in characteristic. EPOXY COATING: 94V-0 COLOR CODE: YELLOW/WHITE 5. Iron Powder Material Properties PROPERTY Initial Permeability Curie Temperature Pratical Frequency Range Specific Gravity Temperature Stability (+) UNIT SYBOL mi 26 75 >300 1-300 o C Tc KHZ d Ppm/oC 6.7 780 THE ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 [email protected] 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 26 www.DataSheet.in ALLP WER SOURCE THE MN-ZN TOROID CORES Symbols Definitions Effec...