Document
SURFACE MOUNT DEVICE LED Part No. : L-C150KRCT
PACKAGE OUTLINE DIMENSIONS
REV:A / 0
1.20 R0.10
1.10
0.55
2.10
0.55
5.00°
1.10 0.48 ~ 0.50 0.50
Notes: 1. All dimensions are in millimeters. 2. Tolerance is ± 0.1mm (.004") unless otherwise noted.
Features
Top view, wide view angle, single color Chip LED. Package in 8mm tape on 7" diameter reels. Compatible with automatic Pick & Place equipment. Compatible with Infrared and Wave soldering reflow solder processes. EIA STD package. I.C. compatible.
DRAWING NO. : DS-71-03-0008
DATE : 2003-12-10
PAGE 1
www.DataSheet.in
SURFACE MOUNT DEVICE LED Part No. : L-C150KRCT
Chip Materials
Dice Material : AlInGaP Light Color : Super Red Lens Color : Water Clear
REV:A / 0
Absolute Maximum Ratings(Ta=25℃)
Symbol PD IPF IF VR ESD Topr Tstg Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current De-rating Linear From 25℃ Reverse Voltage Electrostatic Discharge Threshold(HBM) Operating Temperature Range Storage Temperature Range Wave Soldering Condition (Two times Max.) Infrared Soldering Condition (Two times MAX.)
Note A
Parameter
Rating 75 80 30 0.25 5 2000 -40 ~ +85 -40 ~ +85 260 (for 5 seconds) 240 (for 5 seconds)
Unit mW mA mA mA/℃ V V ℃ ℃ ℃ ℃
Note A : HBM : Human Body Model. Seller gives no other assurances regarding the ability of to withstand ESD.
Electro-Optical Characteristics(Ta=25℃)
Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width Forward Voltage Reverse Current Symbol IV 2θ1/2 λp λd Δλ VF IR Min. 16.0 Typ. 40.0 130 639 631 17 2.0 2.4 100 Max. 80.0 Unit mcd deg nm nm nm V μA IF =20mA VR = 5V Test Condition IF=20mA Note 2 Measurement @Peak IF=20mA
DRAWING NO. : DS-71-03-0008
DATE : 2003-12-10
PAGE 2
www.DataSheet.in
SURFACE MOUNT DEVICE LED Part No. : L-C150KRCT
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that proximities the CIE eye-response curve. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. Caution in ESD : Static Electricity and surge damages the LED. It is recommend use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. 5. Major standard testing equipment by “Instrument System” Model : CAS140B Compact Array Spectrometer and “KEITHLEY” Source Meter Model : 2400.
REV:A / 0
Typical Electro-Optical Characteristics Curves
Fig.1 Relative Intensity vs. Wavelength
DRAWING NO. : DS-71-03-0008
DATE : 2003-12-10
PAGE 3
www.DataSheet.in
SURFACE MOUNT DEVICE LED Part No. : L-C150KRCT
Typical Electro-Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
REV:A / 0
Fig.2 Forward Current vs.Forward Voltage
Luminous lntensity(mcd).