Single D Flip-Flop
NLX1G74
Single D Flip-Flop
The NLX1G74 is a high performance, full function edge−triggered D Flip−Flop in ultra−small f...
Description
NLX1G74
Single D Flip-Flop
The NLX1G74 is a high performance, full function edge−triggered D Flip−Flop in ultra−small footprint. The NLX1G74 input structures provide protection when voltages up to 7.0 V are applied, regardless of the supply voltage.
Features
Extremely High Speed: tPD = 2.6 ns (typical) at VCC = 5.0 V Designed for 1.65 V to 5.5 V VCC Operation Low Power Dissipation: ICC = 1 mA (Max) at TA = 25°C 24 mA Balanced Output Sink and Source Capability at VCC = 3.0 V Balanced Propagation Delays Overvoltage Tolerant (OVT) Input Pins Ultra Small Package NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
This is a Pb−Free Device
TRUTH TABLE
Inputs
Outputs
PR CLR CP D Q Q
Operating Mode
L HX XHL
HLX XLH
L
L
X
X
HH
Asynchronous Set Asynchronous Clear
Undetermined
H
H
↑
h
H
L
HH↑
l
LH
Load and Read Register
H
H
↑
X NC NC
Hold
H
= High Voltage Level
h
= High Voltage Level One Setup Time Prior to the Low−to−High
Clock Transition
L
= Low Voltage Level
l
= Low Voltage Level One Setup Time Prior to the Low−to−High
Clock Transition
NC
= No Change
X
= High or Low Voltage Level and Transitions are Acceptable
↑
= Low−to−High Transition
↑
= Not a Low−to−High Transition
For ICC reasons, DO NOT FLOAT Inputs
http://onsemi.com
18
UQFN8 MU SUFFIX CASE 523AN
MARKING DIAGRAM
1 AA MG G
AA = Device Code M = Date Code* G = Pb−Free Package...
Similar Datasheet