TSSOP-C10J

LSI Assembly TSSOP-C10J TSSOP-C10J 3.0±0.1 (Max 3.35 include BURR) 10 9 8 7 6 4 +6 -4 4.9±0.2 3.0±0.1 0.45±0.15 0.85±0.05 0.5 1 2 3 4 5 1PIN MARK S 0.145 -0.03 +0.05 1.1MAX 0.1±0.05 0.08 S 0.5 0.22 -0.04 +0.05 0.08 M (Units : mm) The contents described herein are subject to change without notice. www.DataSheet.in 0.95±0.2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected w...