D-607-40

Fax-on-Demand: (800) 260-9099 (650) 361-6523 Before ordering check with factory for most current data. FAX ID 5600 Description Data sheet Coaxial Cable Termination SolderSleeve PCB/coaxial cable terminators www.DataSheet4U.com Applications Used for terminating coaxial cable to printed circuit boards. Features/Benefits Provides a completely shielded, low-resistance, matchedimpedance termination with very low VSWR (D-607 series only). Transparent Kynar insulation sleeve provides encapsulation, inspectability, strain relief, and insulation. Prefluxed solder preform provides a controlled soldering process. One-piece design offers easy installation and lower installed cost. Preinstalled PCB termination body provides convenience and ease of installation. Product Options Product series D-607 B-046 Typical application performance Matched impedance up to 2.3 GHz Effective transmission up to 100 MHz Shield method Metal body Pin to ground Product Selection Process 1. Select product series from the Product Options table above. 2. Determine cable RG number or outside diameter dimensions. 3. Select the appropriate part number from Table A (D-607 series) or Table B (B-046 series). For D-607 (matched impedance) series, determine straight or right-angle entry to PCB and grid pattern, then select the appropriate part number from Table A below. For B-046 (PinPak, or pin to ground) series, determine hole spacing and diameter. Refer to Table B for product selection (see ...