Coaxial Cable Termination
Fax-on-Demand: (800) 260-9099 (650) 361-6523 Before ordering check with factory for most current data.
FAX ID 5600
Des...
Description
Fax-on-Demand: (800) 260-9099 (650) 361-6523 Before ordering check with factory for most current data.
FAX ID 5600
Description Data sheet
Coaxial Cable Termination
SolderSleeve PCB/coaxial cable terminators
www.DataSheet4U.com
Applications Used for terminating coaxial cable to printed circuit boards. Features/Benefits Provides a completely shielded, low-resistance, matchedimpedance termination with very low VSWR (D-607 series only). Transparent Kynar insulation sleeve provides encapsulation, inspectability, strain relief, and insulation. Prefluxed solder preform provides a controlled soldering process. One-piece design offers easy installation and lower installed cost. Preinstalled PCB termination body provides convenience and ease of installation.
Product Options
Product series D-607 B-046
Typical application performance Matched impedance up to 2.3 GHz Effective transmission up to 100 MHz
Shield method Metal body Pin to ground
Product Selection Process
1. Select product series from the Product Options table above. 2. Determine cable RG number or outside diameter dimensions.
3. Select the appropriate part number from Table A (D-607 series) or Table B (B-046 series). For D-607 (matched impedance) series, determine straight or right-angle entry to PCB and grid pattern, then select the appropriate part number from Table A below.
For B-046 (PinPak, or pin to ground)
series, determine hole spacing and diameter. Refer to Table B for product selection (see ...
Similar Datasheet