DatasheetsPDF.com

D-607-09 Dataheets PDF



Part Number D-607-09
Manufacturers Raychem
Logo Raychem
Description Coaxial Cable Termination
Datasheet D-607-09 DatasheetD-607-09 Datasheet (PDF)

Fax-on-Demand: (800) 260-9099 (650) 361-6523 Before ordering check with factory for most current data. FAX ID 5600 Description Data sheet Coaxial Cable Termination SolderSleeve PCB/coaxial cable terminators www.DataSheet4U.com Applications Used for terminating coaxial cable to printed circuit boards. Features/Benefits • Provides a completely shielded, low-resistance, matchedimpedance termination with very low VSWR (D-607 series only). • Transparent Kynar insulation sleeve provides encapsulat.

  D-607-09   D-607-09


Document
Fax-on-Demand: (800) 260-9099 (650) 361-6523 Before ordering check with factory for most current data. FAX ID 5600 Description Data sheet Coaxial Cable Termination SolderSleeve PCB/coaxial cable terminators www.DataSheet4U.com Applications Used for terminating coaxial cable to printed circuit boards. Features/Benefits • Provides a completely shielded, low-resistance, matchedimpedance termination with very low VSWR (D-607 series only). • Transparent Kynar insulation sleeve provides encapsulation, inspectability, strain relief, and insulation. • Prefluxed solder preform provides a controlled soldering process. • One-piece design offers easy installation and lower installed cost. • Preinstalled PCB termination body provides convenience and ease of installation. Product Options Product series D-607 B-046 Typical application performance Matched impedance up to 2.3 GHz Effective transmission up to 100 MHz Shield method Metal body Pin to ground Product Selection Process 1. Select product series from the Product Options table above. 2. Determine cable RG number or outside diameter dimensions. 3. Select the appropriate part number from Table A (D-607 series) or Table B (B-046 series). • For D-607 (matched impedance) series, determine straight or right-angle entry to PCB and grid pattern, then select the appropriate part number from Table A below. • For B-046 (PinPak, or pin to ground) series, determine hole spacing and diameter. Refer to Table B for product selection (see illustration beneath Table B for cable dimensions). Table A. D-607 Series Part Numbers Cable dimensions (mm/in) Max. outside diameter RG cable number 174, 178, 179, 316, 404 Jacket 1.5–3.55 (.060–.140) Shield 1.1–3.15 (.045–.125) Dielectric 0.60–2.25 (.025–.090) Part number Entry to PCB Straight grid 5.08 (.200) D-607-09 Right angle grid 5.08 (.200) D-607-10 Straight grid 2.54 (.100) D-607-40* *Limited for use with RG 174, 178, and 404. Users should independently evaluate the suitability of the product for their application. R Electrical Interconnect Products 9-45 Table B. B-046 Series Part Numbers www.DataSheet4U.com Cable dimensions (mm/in) RG cable number 178, 404 179, 316 A 0.3–0.8 (.011–.032) 0.3–1.6 (.011–.063) B 0.5–1.7 (.019–.067) 1.2–2.5 (.047–.100) C 1.3–2.3 (.050–.091) .1.5–2.8 (.060–.110) D max. 3.4 (.134) 4.4 (.173) Pin diameter 0.6 (.023) 0.8 (.031) 0.6 (.023) 0.8 (.031) Part number Spacing between pins 5.08 (.200) 2.54 (.100) B-046-14-N B-046-10-N B-046-11-N B-046-15-N B-046-66-N B-046-68-N 6.35 (.250) B-046-12-N B-046-13-N B-046-16-N B-046-18-N A B C D Product Characteristics Material Insulation Solder and flux Termination body/pin Typical performance Voltage drop Tensile strength Dielectric strength Temperature rating Insulation resistance Radiation-crosslinked, heat-shrinkable polyvinylidene fluoride (Kynar) Sn63 Pb37, RMA flux Copper alloy, solder-plated 2.0 mV Exceeds strength of conductor 2.0 kV –55°C to 150°C 1000 megohms Electrical performance (typical) D-607 series only Frequency VSWR (D-607-09, -40) 350 MHz 1.04 max. 700 MHz 1.05 max. 2.3 GHz 1.09 max. VSWR (D-607-10) 1.04 max. 1.09 max. 1.12 max. Specifications/Approvals Series D-607 B-046 Raychem RT-1404 RT-1404 Installation For proper installation of these devices, the correct heating tool and reflector attachment must be used. Any one of the following Raychem heating tools is recommended: • HL1802E • AA-400 Super Heater • IR-1759 MiniRay • CV-1981 Refer to Raychem installation procedure ES61139 for detailed instructions and recommended reflector attachments. You will find ordering information for these tools in the Application Equipment section of this catalog. MiniRay, Raychem, and SolderSleeve are trademarks of Raychem Corporation. Kynar is a trademark of Elf Atochem North America, Inc. 9-46 Electrical Interconnect Products R Users should independently evaluate the suitability of the product for their application. .


CTC3F D-607-09 D-607-10


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)